MOSFLM 6.11 User Guide
This describes MOSFLM version 6.11 for processing image plate and CCD data
(2nd March 2001)
Andrew G.W. Leslie MRC Laboratory of Molecular Biology Hills Road, Cambridge CB2 2QH UK E-mail: email@example.com Tel (+44) (0) 1223-248011
Any constructive comments on this User Guide would be very welcome.
Changes since 6.10Multiple mosflm.lp files via environment variable MOSFLM_VERSION_NUMBERS; background DPS autoindexing; many small modifications and bug fixes. Installation cleaned up (now using CCP4 distributed XDL_VIEW libraries for all platforms).
Changes since 6.01
Automatic mosaicity estimation (via GUI). New post refinement option to allow post refinement when the sum of the mosaicity and beam divergence is more than twice the oscillation angle (POSTREF MULTI). Improvements to autoindexing and spot finding. Improved circle fitting, and option to define backstop shadow interactively. Anisotropic resolution limits allowed. New detectors: Brandeis 2x2 CCD (B4), Raxis-V and DIP2040. Reads (basic) CBF format images. Data harvesting (not fully implemented, requires latest CCP4 library). Many small bug fixes.
Changes since 6.00
Cell refinement added to the new DPS autoindexing, plus refinement of direct beam position. Manual spot-finding option. Option to write multiple MTZ files (if processing while collecting data). Fit circles option. Bug fix for non-zero two-theta indexing. Many small bug fixes.
Changes since 5.51
New FFT based autoindexing algorithm from DPS added (Steller,Bolotovsky and Rossmann (1998) J. Appl. Cryst. 30, 1036-1040.) New detector types LIPS (large image plate scanner at ESRF) and SBC1 (Westbrook detector at APS) added.
Changes since 5.50
New detector type MARCCD for 135mm circular CCD detector from Mar Research. Allows partials to lie on up to 100 images (previous limit was 10) New keyword TEMPLATE for more general definition of image filenames. Generalise direction of two-theta axis (previously had to be parallel to fast changing direction in image). More changes to STRATEGY algorithm. Standardise FORTRAN so that code will compile under Linux (this needs a new version of the autoindexing code...post 5/5/98)
Changes since 5.40
Improved strategy algorithms. New detector types (Mar345, ADSC CCD) A host of minor bug fixes, and changes to make the program easier to run.
Changes since 5.30
The major change to version 5.40 is that the code for the spot-finding program (IMSTILLS) and autoindexing (REFIX) has been incorporated into MOSFLM. A new menu for the X-window interface has been introduced, which allows the user to find spots, autoindex images, run the strategy option,refine cell parameters (using post-refinement) and integrate images interactively. (All these features are of course still available when running a background job). The new menu is invoked by using the "IMAGE" keyword to read in an intial image. The data collection strategy option has been available since version 5.30, but has been improved in the current version, particularly by the option to speed up the calculation by any desired factor and optimise anomalous data. Additional image formats have been added. The program can now handle images from Mar Research, Raxis (II or IV), Mac Science, Molecular Dynamics, Fuji and ESRF CCD detectors.
The following keywords are no longer necessary (but can still be given to override program defaults) :
RASTER SEPARATION GENFILE HKLOUT PIXEL
and for Mar Research, ADSC, Mac Science and RaxisIV detectors:
and oscillation angles.
(Note however that the header information is not always correct for Mar detectors at synchrotron sites, because the software controlling the spindle axis (and/or distance) does not communicate with the Mar software controlling the detector. Check this with the station manager)
See Appendix I for a more detailed list of major changes from earlier versions.
This User Guide is not exhaustive in describing all options available. However all possible keywords are described in the help library file (mosflm.hlp) which is part of the distribution. The help library is an ascii file, and can therefore be read with an editor, or invoked by typing "HELP" at the mosflm prompt (==>) when runing the program interactively. Note that the environment variable "CCP4_HELPDIR" should point to the directory containing the help library. The bugs that prevented the online help working correctly have now been fixed.
The source code as distributed contains the code for the FFT based autoindexing but NOT for REFIX. I can distribute the REFIX code by E-mail to academic institutions only, or to those who already have the Mar XDS software. Please send an E-mail to the address given above to get the REFIX autoindexing code.
Back to Contents Page
Data processing falls naturally into three sections:
These notes will be restricted to topics (1) and (2), which are now both present in the MOSFLM program alone. The CCP4 program SCALA is strongly recommended for the third step (scaling and merging).
There are several input and output files and it is crucial that the output files are given unique filenames when two (or more) processing jobs are being run from the same directory, or the results are very unpredictable!
1) The image fileNAMING CONVENTION FOR IMAGES
It is assumed that the images conform to a naming convention where the image name is made up of three parts, a template, a three digit number and an extension. The template can be up to 40 characters long, and should be separated from the three digit number by a hyphen (-) or an underscore (_). The extension can be up to 8 characters long and should be separated from the three digit number by a period (.). Note that the template can contain underscores or hyphens.
Examples of valid image filenames are:
ALTERNATIVE NAMING CONVENTIONlysozyme_cryst1_021.image catx1_001.img f1_tray42_wellb6_001.osc
If the image filenames do not conform to the specification given above, the TEMPLATE keyword can be used to define a very general format for the image filenames. If the TEMPLATE keyword is to be used, it MUST preceed the IMAGE keyword in the input, and the image NUMBER, not the filename, should be given. See TEMPLATE for more information.
will read the file "fred_023" (no filename extension).TEMPLATE fred_### IMAGE 23 PHI 22 TO 23
Output Files1) The output MTZ file containing the integrated intensities. Set with keyword HKLOUT or on the command line using HKLOUT. When not given, a default filename made up from the crystal identifier (or TEMPLATE) and the first image number is used. It is now possible to specify that multiple MTZ files are written during one integration run (subkeyword MULTIPLE on HKLOUT keyword. In this case, a separate MTZ file will be written for each block of images processed (see BLOCK subkeyword of PROCESS keyword). The filenames will be distinguished by _001, _002, _003 etc being appended to the specified (or default) filename. Eg lysx1_1to50_001.mtz, lysx1_1to50_002.mtz etc. This allows some of the data to be scaled and merged prior to the data processing finishing. (Binary)
2) If autoindexing or refining cell parameters a file containing the refined crystal orientation matrices is written. Filename set with keyword NEWMAT, defaults to NEWMAT. (Ascii)
3) The summary file. Contains a summary of processing results. Can be assigned on the command line (SUMMARY), defaults to SUMMARY. This file can be input to loggraph for graphical representation.(Ascii)
4) When running interactively, all output written to the terminal window is also written to the file "mosflm.lp" (Ascii). If the environment variable MOSFLM_VERSION_NUMBERS has been assigned, the program will write sequentially numbered output files mosflm_**.lp (* = 01 - 99) for successive runs of the program.
1) The "Generate" file. Assigned with keyword GENFILE, defaults to the same as the MTZ filename but with the extension ".gen" instead of ".mtz". (Binary)
2) The measurement boxes file. Assigned on the command line using SPOTOD defaults to SPOTOD. Ths file can be very large, and should normally be assigned to a scratch disk and deleted as part of the command procedure.
3) A reflection coordinate list, assigned using COORDS on the command line. This is only produced when the "SEPARATION CLOSE" option is being used to process images with very closely separated spots.
Example of a command line:
ipmosflm HKLOUT lyso_srs.mtz SUMMARY lyso_srs.sum \ SPOTOD /scr0/andrew/lys.spotod \ COORDS /scr0/andrew/lys.coords << eof-ipmos GENFILE /scr0/andrew/lys.gen NEWMAT lyso_srs.mat .... .... eof-ipmos
The type of detector is specified either by the DETECTOR keyword, or by a SITE keyword, with the latter generally being used for synchrotron sites that use detectors that are not commercially available. At present, the follow detectors are allowed.
Note that no special input is required to distinguish between the different types of Mar Research image plate scanner (18,30 or 34.5cm (Mar345)). The image size is read from the header record and the appropriate limits and pixel size are set up automatically.
Both unpacked and packed image formats are supported for the Mar345 scanners (no DETECTOR keyword required to distinguish these).
For Mar, Raxis and Mac Science scanners it is not necessary to specify the size of the image, as it is determined from the image header.
For offline scanners (FUJI and MD) it will also be necessary to define the orientation of the image relative to the X-ray beam and rotation axis, also using the DETECTOR keyword. See the help library (Subsection Novel detectors of DETECTOR) for details on how to do this.
If the rotation axis is reversed (usually a peculiarity of synchrotron sites) this can be dealt with by specifying: DETECTOR REVERSEPHI ..again, see the help library.
For CHESS, the station (A1, F1 or F2) and the detector must be specified. Possible detectors are the Gruner CCD detector working in 1K, 2K or 2K binned modes, the ADSC single module CCD detector (ADSC) the ADSC 2x2 CCD detector (QUANTUM4) and FUJI image plates. eg
SITE CHESS [A1 F1 F2] [FUJI [CCD [1K 2K 2KBINNED ADSC QUANTUM4]]]
For SSRL and ALS, the 2x2 ADSC detector is allowed: eg
SITE SSRL ADSC, SITE ALS ADSC
It cannot be emphasised strongly enough that images must be examined closely to check the following:
Images can be displayed using the IMAGE keyword followed by the full filename of the image (including the directory if the image is not in the current directory). The only other keyword required specifies the type of detector (default is Mar Research image plate scanners). This will bring up the new menu interface which allows autoindexing, integration etc.
Note that MOSFLM displays the image viewed from the detector looking towards the source (cameraman's view), and also that the "fast changing" direction in the image is ALWAYS vertical in the display, regardless of whether it is vertical or horizontal in the actual detector. Thus some images will be rotated by 90 degrees.
orIMAGE /fred/images/lysox1_001.image GO
In order to measure the resolution of individual spots on the images or display the resolution circles the wavelength and crystal to detector distance need to be given. For Mar Research, ADSC, RaxisIV and Mac Science detectors the wavelength and distance will automatically be taken from the header records in the image file, for other types of image the DISTANCE and WAVELENGTH keywords should be given, or the values set interactively using the X-windows interface.DETECTOR RAXISIV IMAGE /fred/images/lysox1_001.image GO
Parameters that may need to be defined (and the appropriate keywords) are:
NOTE: Input within square brackets is optional for Mar, ADSC, RaxisIV and Mac Science images. If a PHI keyword is given, this will override the phi values in the image header, and phi values in the header will be ignored for any subsequent image that is read in. The default DETECTOR type is MAR, so this need not be given for Mar images.
IMAGE catx1_001.img [PHI 0.0 TO 1.0] BEAM 149.5 151.0 DETECTOR MAR (or SMALLMAR, MARCCD, ADSC, RAXIS, RAXISIV, SBC1, DIP2000, DIP2030, DIP2040, ESRF CCD, FUJI, MD) [NEWMAT test_001.mat] ! Defines the name of the file in which the results ! of autoindexing or postrefinement will be written. [WAVELENGTH 1.542] [DISTANCE 250.0] GOThis will invoke the X-window display, and a Menu list as shown below:
Read image Read in another image. Find spots Find spots on the current (displayed) image. Edit spots Allows manual rejection of spots. Save spots Writes all spots to a file for use with old REFIX. Clear spots Deletes spots from display or list of stored spots. Select images If spots have been found on several images, allows selection of images to be used in autoindexing. Autoindex Invokes autoindexing (DPS or REFIX). Estimate mosaicity Gets an initial estimate of mosaic spread. Predict Predicts spot pattern. Clear prediction Deletes predicted pattern from display. Adjust Adjust the fit between observed and predicted patterns. Refine cell Invokes a POSTREF SEGMENT run to refine cell parameters. Integrate Allows integration of images. Strategy Run the strategy option. Keyword input Allows keyworded input. Find hkl Allows a specified reflection to be identified. Pick Display pixel values Measure cell Measure cell parameters. Circles Display resolution circles. Beam/ backstop Allows interactive definition of beamstop shadow. Exit Close down X-windows display.The various options in this menu list are discussed in the sections below. Note that there are some on/off and yes/no toggle boxes at the bottom of the "Processing parameters" window. These are described below:
Prompts On/Off (default on)
When "prompts" is "on", additional information is given when some of the menu options are chosen. For experienced users, this additional information can be suppressed by turning the prompts "off".
Update display: After refinement No/Yes After integration No/Yes
By default, the display is updated each time a new image is read, and at no other time. By setting the "After refinement" toggle to Yes, the display will be updated after refinement of the detector parameters, so that it is possible to check how well the predicted pattern matches the image. If the "After integration" toggle is set to yes, each image will be display after it has been integrated, with "Bad spots" indicated and residual vectors (beteen observed and predicted spot positions) for fully recorded spots also shown. It is possible to reject additional reflections, or reclassify Bad spots, at this point. Note that because images are integrated in "Blocks", during the actual integration of all images in a block the image that is displayed will be that of the last image in the block, unless the "After integration" toggle has been set to yes.
Timeout mode: Off/On
If the Timeout mode is set to "On" during an Integration or Refine Cell run, then when each image is displayed the program will wait for 2 seconds for the user to select a menu option (it is best to start by turning the Timeout mode off if you want to do this). After this period (which can be changed with keyword "TIMEOUT") the program will just carry on. With the timeout mode "On" it is therefore possible to integrate a series of images without directly interacting with the program. This can be very useful if one just wants to keep an eye on the processing but do not want to keep hitting the "Continue" menu option.
Back to Contents Page
2: A Quick Guide
2.1 Startup keywords 2.2 Autoindexing 2.3 Estimating mosaic spread 2.4 Running the Strategy option 2.5 Determining oscillation angles with the TESTGEN option 2.6 Integrating the first image to determine if the exposure time is OK 2.7 Interpreting those "WARNING" messages 2.8 Getting accurate cell parameters 2.9 Integrating a block of images 2.10 Integrating the dataset
This is a brief guide on how to process data using the new menu options. For more details on each step in the procedure, see sections 3-6.
=> TITLE My lysozyme data ! This title is transferred to the ! MTZ file => IMAGE lyso_001.image [PHI 0 TO 1] ! Filename of first image. For Mar, ! ADSC, Mac Science and RaxisIV images ! the phi values will be taken from the ! image header if not given here. ! If phi values are specified here, ! the values in the header will be ! ignored for this an all subsequent ! images read in. => BEAM 150.0 149.0 ! Direct beam coordinates If not a Mar Research IP scanner: => DETECTOR RAXISIV ! or RAXIS (for RAXIS II) or DIP2000 etc If not processing Mar Research, ADSC, R-axis or Mac Science images: => WAVE 0.91 ! For Mar, ADSC, RaxisIV and Mac Science => DISTANCE 300 ! this information is taken from the header ! but can be overwritten using the ! keywords. => SYMM p43212 ! If known, give cell and symmetry => CELL 79 79 38 ! otherwise omit completely. Not essential for first stages, but needed for integration: => DIVERGENCE 0.1 0.03 ! If isotropic, the beam divergence ! can be included in the mosaic spread. => SYNCHROTRON POLARIZATION 0.9 ! Defaults to 0.86 (SRS, Daresbury UK) => GAIN 1.7 ! See section 8.1 for a way to ! estimate the gain if not known. => GOAt this point, the image will be displayed with a list of "Processing parameters" on the far left (these can be changed by the user), a "Main menu" and beneath the Main menu a table of "Output" parameters.
The following three queries ONLY affect REFIX autoindexing, if using the "new" DPS indexing, simply enter return to all three queries. The program asks if you want to change the spacegroup to 0 (ie spacegroup not known). For REFIX autoindexing if a spacegroup has been specified earlier then ONLY solutions for that spacegroup will be found, and if the spacegroup is wrong, the autoindexing may fail. The program asks if you want to fix the cell. This only has an effect if a cell and spacegroup have been defined. The default is not to fix the cell. The program then asks if the detector distance is to be fixed. The default is "yes", UNLESS the user has asked to fix the cell, in which case the default is to refine the distance.
Next, the user will be prompted to supply a filename for the output orientation matrix. Finally, for DPS indexing only, the user will be asked to enter a value for the maximum expected cell edge; the program makes an estimate of this. If the value given here is significantly (>25%) less than the true largest cell edge, the indexing will fail. Equally, if the true cell is VERY much smaller than the default value, it may also select an incorrect cell, with one or more parameters a multiple of the true cell. The default value will work in the great majority of cases.
All queries have a default, which can be selected by simply entering carriage return. The image will then be autoindexed.
When using the new DPS indexing, if a spacegroup and cell have been given, the cell parameters determined by the autoindexing will be permuted to best match the input values, but the user must still select the solution from the list provided. If using REFIX, the same information will force the image to be be autoindexed with this cell and no alternatives will be listed. If no spacegroup information has been given, for both algorithms the user will be presented with a list of choices, sorted on a "PENALTY" parameter (the lower the PENALTY the better). The user must select a spacegroup, and the cell is refined imposing that symmetry.
The success of the autoindexing can be checked by predicting the spots for the current image using the menu option "Predict". If not successful, try adjusting the intensity threshold "Min I/sig(I)" or the maximum cell length (for the FFT based algorithm) or read in another image (Read image menu option), find spots on it (Find spots) and repeat autoindexing (Autoindex). Spots from a satellite crystal can be removed using the Edit spots option.
This will generate a reflection list, a unique reflections list, merge them and tell you what rotation range to use to get a maximally complete dataset.MOSFLM => STRATEGY MOSFLM => GO
If you then want to reduce the total rotation range (to save time) and still get a maximally complete dataset type the following at the STRATEGY => prompt:
This instructs the program to find two 30 degree segements that give maximum completeness. You can try 3 segments (of 20 degrees) if you like, but this rarely (in my experience) gives significantly greater completeness and will take significantly longer. (Also don't forget that the more segments you have, the more unmatched partials you will get).STRATEGY => ROTATE 60 SEGMENTS 2 STRATEGY => GO
For orthorhombic space groups, you should also try STRATEGY ALTERNATE if the predicted completeness in not as high as expected.
Having determined what rotation range needs to be collected, you can check what the (maximum) rotation angle is to avoid getting (too many) spatial overlaps on the images. Remember you must have realistic estimates of the mosaic spread and minimum spot separation for this to be meaningful.
At the STRATEGY => prompt type:
This will describe the possible keywords. If your data collection was in two segments of -15 to 15 degrees and 45 to 75 degrees and you want no overlaps type :STRATEGY => TESTGEN
and the program will calculate the MAXIMUM possible rotation angles for this range, at intervals of 5 degrees.STRATEGY => TESTGEN START -15 END 15 STRATEGY => GO
for the second segment.STRATEGY => TESTGEN START 45 END 75 STRATEGY => GO
To test for overlaps using a particular oscillation angle (eg 1.5 degrees) type:
STRATEGY => TESTGEN START 45 END 75 ANGLE 1.5 STRATEGY => GO
To get back to the Menu, type EXIT at the STRATEGY prompt:
First, set the centre and radius of the backstop shadow, by selecting the "Beam/backstop" menu option. Click with the mouse around the backstop shadow. The program will fit the best circle to these points. If the fit looks OK, the backstop centre and radius are updated. This can also be used to update the direct beam position, but it is rare that the beamstop shadow is accurately centred on the direct beam position !STRATEGY => EXIT
An alternative way of dealing with backstop shadows (particularly for an extended backstop) is to use the NULLPIX keyword. This is used to define a minimum pixel value, and any spot that has a pixel within its measurement box with a value lower than (or equal to) this minimum will be rejected. Be sure that the value given is BIGGER than the background at the edge of the image, or all the high resolution data will be rejected !
Then select the "Integrate" menu option, and answer the questions (most can be answered by entering carriage return).
The program will put up the predicted pattern and then wait for input (unless the timeout mode is set). If the pattern is a good fit, choose menu option "Continue". If the pattern is not aligned with the spots, choose the option "Adjust" and follow the instructions to align the pattern with the spots. (The usual reason for poor alignment is an error in the direct beam coordinates, but as these are refined as part of the autoindexing this should not normally be a problem).
The image will then be integrated. Check the <I>/sigma<I> values (either in the terminal window or in the "mosflm.lp" file), and the Rsym if you have symmetry related fully recorded reflections on this image. The value of SDRATIO is a better guide than the actual Rsym, as the latter will depend on the intensity of the reflections. The SDRATIO should lie in the range 1 to 3.
After the integration, the program will usually print a list of "WARNING" messages to the terminal window (or mosflm.lp). Don't worry about messages about the standard profiles at this stage, or large positional residuals (because the cell has not yet been accurately determined). However if the " OVERALL BACKGROUND RATIO (BGRATIO)" message is present, this suggests the detector GAIN may be wrong, and the input value (or default value if not input) need to be multiplied by the square of the value of the BGRATIO (get the default value from the mosflm.lp file, where all parameters are printed prior to the integration step). Beware, however, that images showing diffuse scatter will give a high BGRATIO even when the GAIN is correct (eg up to 1.5).
Accurate cell parameters are essential to obtain the best data quality. MOSFLM uses a post-refinement procedure to determine accurate cell parameters. For trigonal or higher symmetry, an accurate cell can usually be determined from a single "wedge" of data (typically 3-5 degrees), unless the unique axis is approximately along the X-ray beam direction in which case either a different phi value should be used or two segments of data. For orthorhombic or lower symmetry two "wedges" of data widely separated in phi will give the best results. In the latter case, one can either wait until a large rotation range has been collected before refining the cell, or one can start by collecting a few degrees at (say) phi 85 to 90, then start collecting from phi = 0.
When the appropriate data (images) are available, select the "Refine cell" menu option. Answer the queries. Although the default number of images to use is 2 (in each wedge), this is in fact the minimum number and better results will often be obtained by using 3 or 4 images in each wedge.
It is important to have a realistic estimate of the mosaic spread before refining the cell.
Post-refinement yields very accurate cell parameters, but has a relatively small radius of convergence. If the shift in cell parameters is more than 2.5 times the estimated error, the integration of the images and the actual refinement will be repeated. This will happen up to a maximum of 5 times. It is not unusual for 2 or 3 complete rounds to be required if the initial cell parameter estimates came from auto-indexing a single image.
The next step is normally to integrate a block of between 5 and 10 images. Use the "Integrate" menu option as before. In this case, pay particular attention to the list of warning messages to see if any parameters or options need to be reset. It is also a good idea to check the appearance of the standard profiles (these are output to the terminal window but also to the file "mosflm.lp"). Make sure that adjacent spots are being adequately resolved, and that the peak is not spilling into those pixels marked as background. The PROFILE TOLERANCE parameters are crucial in determining the appearance of the standard profiles. Also try to ensure that NO profiles are being averaged. If necessary, change the minimum rms variation in the background (PROFILE RMSBG) or the number of different profiles (by defining PROFILE XLINES and PROFILE YLINES) to avoid profile averaging. Check that there are not too many reflections being rejected as "BAD SPOTS". If a significant number of strong reflections are being rejected for "Poor profile fit", if the cell has been accurately determined, the mosaic spread appears correct and the GAIN is correct, consider increasing the rejection value (REJECTION PKRATIO) from its default of 3.5 to 4.0. It should NOT be necessary to increase this above 4.0, but rejection of the strongest reflections may have a serious effect on structure determination.
Once a block of images has been successfully integrated, the complete dataset can be integrated. If data processing is started before data collection is complete, use the WAIT keyword to make the program wait for an image to be completed before it tries to integrate it.
eg WAIT 15 for 15 minute exposures.
You may also wish to specify multiple MTZ files (one for each "block" of images) so that some data can be scaled and merged in SCALA before data collection/processing has completely finished.
Set the "Timeout mode" toggle (at the bottom of the "Processing parameters" window) so that the program will automatically continue 1 second after displaying each new image (this delay is set with keyword TIMEOUT).
Set the "Prompts" toggle to Off.
Back to Contents Page
3: Determination of crystal orientation, cell parameters and spacegroup
The crystal orientation, cell parameters and possible spacegroups are normally determined from a single rotation image (although 2, 3 or more can be used also). This will typically be a rotation of between 0.5 and 2 degrees, the value being chosen to avoid generating a significant number of spatially overlapped reflections. Autoindexing can be performed interactively or in background mode (at present, only REFIX autoindexing can be done in background), but spacegroup selection can ONLY be done interactively as the user is required to select a cell and spacegroup from a number of possibilities.
All of these parameters have "sensible" defaults and normally they do not need to be changed. Pixels are considered to be part of a spot if the pixel value is more than (Threshold*sigma) above the local background at that radius. The threshold is determined automatically by the program and will normally be appropriate, but for images with very low background (less than 20) it may be necessary to increase the threshold. The program searches for spots lying with radial limits of Rmin and Rmax (mm) from the direct beam position. The first step is to determine a radial background. The direction of this radial background is chosen to be at right angles to the rotation axis (to avoid any backstop shadow). It is normally centred on the direct beam position, but can be offset to one side by the "X offset" or "Y offset" parameters. If the radial background is along Y (the "fast" changing direction in the stored image), then use the "X offset" to change its position. If the default direction is along Y, and a value is entered for the "Y offset", this automatically changes the direction of the background strip to be along the X axis. Entering a negative value for either Rmin or Rmax will switch the background stripe to the opposite side of the direct beam position. The position of the background strip is shown as a red rectangle on the display. If necessary its position should be changed to avoid any shadows or other unusual features on the image. Note that the LIMITS EXCLUDE keywords can be used to exclude rectangular regions of the detector from spot finding (and integration). The minimum and maximum spots sizes (in X and Y) are expressed as a multiple of the median spot size. If the image is very strong and the threshold is too low, then two adjacent strong spots may be treated as a single spot (because the pixel values do not go down to the threshold inbetween them). This problem can be avoided by either increasing the Threshold, or by decreasing Max X and Y sizes, as these spots will be almost twice as large as the average spot. "Min no of pix" sets the minimum number of pixels that constitute a proper spot. Split spots will be treated as a single spot if they are less than "X splitting" and "Y splitting" mm apart in X and Y. Normally this is not a problem with image plate data. In tricky cases (eg very weak spots on a high background) it may be necessary to add spots manually. The program asks if you want to find spots manually both before and after the automatic spot search. This is done by clicking on spots with the mouse. A red cross will be drawn for each spot found. You do not need to position the mouse exactly on the spot, the program will search the area around the mouse position and find the centre of gravity which will be used as the spot position. Manually selected spots are assigned a value of 1000 for I/sig(I). Select the "End add spots" menu option to finish.Threshold Rmin Rmax X offset Y offset Min X size Max X size Min Y size Max Y size Min no of pix X splitting Y splitting
IMPORTANT All found spots are stored and will be used in autoindexing. If changing to a new crystal, spots found previously MUST be deleted using the "Clear spots" menu option.
Autoindexing uses either the FFT based algorithm from DPS (Stellar, Bolotovsky and Rossmann, (1998) J. Appl. Cryst. 30, 1036-1040) or Wolfgang Kabsch's REFIX program (Kabsch, 1988, 1993) both of which have been incorporated into the MOSFLM program.Autoindexing is performed by selecting the "Autoindexing" menu item. For DPS indexing or REFIX indexing if the spacegroup is not know (or set to zero) the program will present a list of possible unit cells and space groups, sorted on the PENALTY of each solution, and the user has to select the appropriate choice. (When using REFIX, if a crystal symmetry AND unit cell have been applied then only solutions for this symmetry will be listed). In this list, the first number is the number for that solution, the second number is a score for that solution (headed "PENALTY"). This is followed by the lattice type, the cell parameters and a list of possible spacegroups. Normally one would choose the solution with the highest possible symmetry, but which still has a reasonably low "PENALTY" (The LOWER the PENALTY the better). example:
18 150 cI 103.13 103.36 103.01 62.8 62.8 62.9 I23,I213,I432, I4132 17 64 tP 74.44 74.54 74.56 92.6 92.2 92.4 P4,P41,P42,P43, P422,P4212,P4122, P41212,P4222, P42212,P4322,P43212 16 63 oP 74.44 74.54 74.56 92.6 92.2 92.4 P222,P2221,P21212, P212121 15 63 tP 74.54 74.56 74.44 92.2 92.4 92.6 P4,P41,P42,P43, P422,P4212,P4122, P41212,P4222, P42212,P4322,P43212 14 62 hR 107.32 103.13 131.17 92.0 89.8 121.4 R3,R32 13 41 oC 103.01 107.80 74.44 90.2 93.3 90.0 C222,C2221 12 41 mP 74.54 74.44 74.56 92.2 92.6 92.4 P2,P21 11 41 mP 74.56 74.44 74.54 92.4 92.6 92.2 P2,P21 10 40 oC 103.01 107.80 74.44 89.8 93.3 90.0 C222,C2221 9 40 mP 74.54 74.44 74.56 92.2 92.6 92.4 P2,P21 8 26 cP 74.54 74.56 74.44 92.2 92.4 92.6 P23,P213,P432, P4232,P4332,P4132 7 24 mC 103.36 107.32 74.54 89.8 93.6 90.1 C2 6 22 mC 103.36 107.32 74.54 89.8 93.6 90.1 C2 5 19 aP 74.44 74.54 74.56 87.4 92.2 87.6 P1 4 6 hR 107.32 107.52 123.58 89.9 90.0 119.8 R3,R32 3 4 mC 103.36 107.32 74.54 90.2 93.6 89.9 C2 2 2 mC 103.01 107.80 74.44 89.8 93.3 90.0 C2 1 0 aP 74.44 74.54 74.56 92.6 92.2 92.4 P1In this case R3 or R32 is an obvious choice. If the direct beam coordinates are inaccurate (or the detector distance or wavelength) there may not be a clear separation between solutions with low penalties and those with much higher penalties). Once you have made a selection the autoindexing is repeated automatically and the cell is refined imposing the appropriate cell constraints. Reflections whose calculated position differs by more than 2.5 standard deviations from the observed one are rejected from the refinement, but this cutoff can be changed. You are given the choice of accepting or rejecting the refined cell parameters and the refined direct beam position. Finally, you are then given the choice of accepting that solution or trying another one from the list. REMEMBER that the true spacegroup can only be determined from reflection intensities, NOT from unit cell parameters. BEWARE of monoclinic spacegroups with beta angles close to 90 being misclassified as orthorhombic etc. The final orientation (A matrix) and cell parameters are written to a file, which can be defined when the autoindexing procedure is initiated, or with the keyword NEWMAT (defaults to NEWMAT). The file can be read in (MATRIX keyword) in future processing jobs. If you want to change (permute) the order of the cell axes, simply include a CELL keyword giving the cell that you would like to fit. For example, in orthorhombic space groups the autoindexing will select the cell with a < b < c. If the cell dimensions are 50, 100, 150 and you want to have a=150, b=50, c=100 give the keyword:
cell 150 50 100before running the autoindexing.
Autoindexing is invoked by including the keyword AUTOINDEX. If no images are specified, the first image to be integrated (specified on the PROCESS keyword) will be used for autoindexing.Thus:
will autoindex using image 1 and then integrate images 1 to 30. Note that the cell derived from the autoindexing, rather than that given by the CELL keyword, will be used during integration. If the cell is known accurately it is usually better to override the cell derived from autoindexing by using the KEEP keyword:CELL 107 107 123 90 90 120 SYMM R32 AUTOINDEX PROCESS 1 TO 30 [ ANGLE 1.0 START 0.0 ]
If you want to include more than one image in the autoindexing they can be specified explicitly:CELL KEEP 107.73 107.73 123.59 90 90 120
will use the first three images. In this case it is assumed that the phi values are read from the image header, or that these images form part of a contiguous rotation in phi.If this is not the case, the phi values can be specified explicitly:AUTOINDEX IMAGES 1 2 3
If the image identifier (used to form the template for the image filename) is not the same for all images, it can also be specified explicitly:AUTOINDEX IMAGE 1 PHI 0 1 IMAGE 20 PHI 50 51
Note that if PHI or IDENT are given, then only ONE image can be specified on each IMAGE keyword so that:AUTOINDEX IMAGE 1 PHI 0 1 IMAGE 20 PHI 50 51 IDENT test_2
The "Min I/sig(I)" threshold can be set also:AUTOINDEX IMAGE 1 PHI 0 1 IMAGE 20 21 IDENT test_2 is NOT allowed
Parameters asociated with spot finding can be set with the FINDSPOTS keyword: eg:AUTOINDEX THRESHOLD 30
FINDSPOTS THRESHOLD 10 RMIN 25 RMAX 75 SPLIT 0.5 0.5 FINDSPOTS MINX 0.5 MAXX 1.5 MINY 0.5 MAXY 1.5 XOFFSET 25
The DPS autoindexing can be used to autoindex in a background job whether or not the spacegroup and/or cell are known. The algorithm used, however, will choose the highest symmetry characteristic lattice consistent with the solution unless instructed otherwise. Thus:
Will autoindex using the first image and assign the space group to the lowest symmetry space group available for the characteristic lattice with the highest symmetry for an acceptable solution, e.g. if the lattice is primitive orthorhombic, the space group will be P222. Adding space group information, e.g. with the following command line:AUTOINDEX DPS PROCESS 1 TO 30 [ ANGLE 1.0 START 0.0 ]
forces the program to accept not only the primitve orthorhombic solution but also sets the space group to P212121. If the cell has been given, the program tries to find a close solution to the known cell.SYMM P212121
The program can be forced to choose a solution from the list of 44 generated thus;
This should only be used when the user knows which solution number is correct; the penalty obtained in the autoindexing is ignored in this case.AUTOINDEX DPS SOLU n
The maximum cell length (in Angstroms) used in the search can be set manually;
Sometimes it can help to discriminate between close solutions if they are pre-refined before making a choice;AUTOINDEX DPS MAXCELL xxxx
The keywords used for REFIX autoindexing can all be used for DPS indexing.AUTOINDEX DPS REFINE
Back to Contents Page
4: Running the STRATEGY option
Having determined the crystal orientation, one then needs to know what rotation range is necessary to collect a complete (or essentially complete) dataset. The STRATGEY option provides a very rapid and convenient means for doing this.
The program will determine the phi angle PHIZONE (see above), and generate a reflection list starting at that phi angle, for a total rotation determined by the Laue group. It will then generate a list of all unique reflections and merge the two lists. Finally it will give the completeness of the data for the rotation range generated:
Optimum rotation gives 98.0% of unique data This corresponds to the following rotation ranges for the final run From 20.0 to 110.0 degrees Type "STATS" for full statistics .... STRATEGY =>Typing STATS at the prompt will give a breakdown as a function of rotation angle and resolution, and a breakdown of the anomalous data. If insufficient time is available to collect the full rotation range required, one can determine the best segments to collect to achieve maximum completeness. Type at the STRATEGY => prompt:
STRATEGY => ROTATE 50 SEGMENTS 2 STRATEGY => GO(*** The ROTATE keyword MUST be given before the SEGMENTS keyword **) The program will then give the best phi ranges to collect for two segments, each of 25 degrees, giving a total rotation of 50 degrees:
Optimum rotation gives 96.1% of unique data This corresponds to the following rotation ranges for the final run From 20.0 to 45.0 degrees From 65.0 to 90.0 degreesOne can try using 3 segments of data instead of two:
STRATEGY => rotate 50 segments 3 STRATEGY => goIn this case, the result is:
Optimum rotation gives 98.0% of unique data This corresponds to the following rotation ranges for the final run From 20.0 to 37.0 degrees From 52.0 to 69.0 degrees From 74.0 to 90.0 degreesThe effect of using other total rotations and different numbers of segments can also be tested (but using more than 3 segments is very time consuming and in fact there is an absolute limit of 4 segments). Alternatively, the completeness of specified segments can be tested:
START 0 END 20 START 65 END 90 GONote that the phi ranges specified on the START and END keywords MUST lie within the phi range generated by the program when it first starts. Thus if, for example, the program has generated reflections from phi=10 to phi=100 then it not possible to try:
START 0 END 30 GOor ROTATE 100 at the STRATEGY prompt (The program will complain).
STRATEGY START -10 END 20 PARTS 2 GO STRATEGY ROTATE 40 SEGMENTS 2 GOThe program will then find the phi values for the two segments (each of 20 degrees) which when combined with the 30 degrees of data already obtained will give the maximum completeness. b) Data from different crystals Imagine that data have been collected from phi = -20 to 15 from an orthorhombic crystal with an orientation matrix "xtal_1.mat" A second crystal is mounted, an image collected and it is autoindexed to give an orientation matrix "xtal_2.mat". The STRATEGY option can now determine the best phi range for this second crystal to complete the data. First, specify the orientation of the first crystal using "Keyword Input" and the keyword MATRIX: MATRIX xtal_1.mat Then autoindex the first image of the second crystal. This MUST be done AFTER the orientation matrix for the first crystal has been specified, because the orientation of the second crystal has to be referred to that of the first. The select the "Strategy" menu option, and enter the following keywords:
MATRIX xtal_1.mat STRATEGY start -20 end 19 PARTS 2 GO MATRIX xtal_2.mat STRATEGY AUTO GONormally the first crystal will have been collected starting at a zone. If this is NOT the case, it will probably be necessary to collect two segments of data from the second crystal to get complete data. This can be done by specifying "STRATEGY AUTO SEGMENTS 2" for the second crystal, and it may be advantageous to specify the sizes of the two segments. Thus if the first crystal was collected starting at 15 degrees away from a zone, for a total of 35 degrees, then the second crystal will need one segment of 15 degrees and another of 40 degrees (90-35-15) go get best completeness. It is also possible to automatically find the best rotations(s) for a smaller total rotation. Once the program has come up with the STRATEGY => prompt (ie after it has found the best solution for a single 55 degree rotation in the above case) one can then type:
STRATEGY => PART 1 ! Include all data from first crystal STRATEGY => AUTO ROTATE 40 SEGMENTS 2 ! Use 2 segments (each 20 degrees for ! second crystalThis means include ALL data that has already been collected (from -20 to +19 in the above example) and then determine the best phi values giving a total rotation of 40 degrees (in two 20 degree segments) from the second crystal.
STRATEGY ROTATE 60 SEGMENTS 2 ANOMALOUSThis will not necessarily be the same phi range(s) as that which maximise the overall completeness.
MAXOSC <rotmax> Only rotation angles between "rotmin" and "rotmax" will be considered. Default: rotmin 0.2, rotmax 5.0 ANGLE <oscang> If the ANGLE keyword is given, then the overlap for a fixed oscillation angle "oscang" is calculated between phi=phstart and phi=phend. No attempt to find the "best" oscillation angle is made. example:
TESTGEN START 0 END 90 OVERLAP 3 MINOSC 0.5Exiting the STRATEGY option Use keyword EXIT to end the strategy option. An Example command file when not using the X-window menu In this case, the type of detector (MAR,SMALLMAR,RAXIS etc) has to be specified, and the crystal to detector distance and wavelength as these cannot be read from the image header.
STRATEGY AUTO DISTANCE 80 DETECTOR SMALLMAR MATRIX lyso_1.mat SYMM 19 BEAM 90 90 DIVERGENCE 0.35 0.3 MOSAIC 0.2 SEPARATION 1.5 1.5 POLARISATION MONOCHROMATOR WAVELENGTH 1.5418 RUN
Back to Contents Page
5: Determining Accurate Cell parameters
5.1 Using Post-refinement to refine the cell 5.1.1 Doing post-refinement interactively 5.1.2 Doing post refinement in background 5.1.3 What the program actually does 5.1.4 Using several segments or different crystals 5.1.5 Tips on post-refinement 184.108.40.206 Processing images showing strong diffuse scatter
The unit cell parameters are refined as part of the autoindexing, but in general not all the parameters will be well defined (in particular, the cell parameter along the X-ray beam direction is ill-determined). Improved values can be obtained by using two or more images widely separated in phi for the autoindexing. However, accurate cell parameters are best determined by post-refinement, for which it is necessary to have a number (at least two) of abutting oscillation images. To obtain accurate cell parameters for orthorhombic or lower symmetry spacegroups, it is essential to have data from two orientations widely separated in phi, but for trigonal or higher symmetry only one "block" of data is normally required.
A pragmatic procedure is as follows:
If more than about 15 degrees of data are available from a single crystal, or several crystals in approximately the same orientation (within 20 degrees) use the "Refine cell" menu option (or the POSTREF SEGMENT option if running in background) to get an accurate cell and then do NOT refine it during integration.
If less than 15 degrees is available, use the refined cell from the autoindexing in processing and try post-refinement using an angular wedge of data, but if this is unstable (large sd's or shifts from cycle to cycle) then fix the cell parameters, as the values from the autoindexing, while they may be in error, will be sufficiently accurate to process a "local region" in reciprocal space, ie up to 10-15 degrees from the starting phi value.
Post-refinement uses the distribution of the intensity of partially recorded reflections over the two images on which the partial is recorded to refine cell parameters, orientation and mosaic spread. It has the distinct advantage that the derived cell parameters are entirely independent of all detector parameters (crystal to detector distance and detector orientation) and distortions (ROFF and TOFF) which, if inaccurate, can lead to significant errors in the cell parameters derived from autoindexing.
**** IMPORTANT ****
The default post-refinement can ONLY use partially recorded reflections which extend over two images. Those which extend over three or more images CANNOT be used. Thus if the mosaic spread (plus beam divergence) is more than twice the oscillation angle, you MUST use the POSTREF MULTI option. If refining the cell interactively, use the "Keyword input" menu item to give these keywords.
Having obtained the crystal orientation by autoindexing, choose the "Refine cell" menu option. You can then select the number of "segments" of data to use in the refinement, the first image and the number of images to be used in each segment. Note that there must be at least two images in each segment, but there is generally little to be gained from using a total of more than 5-10 images in ALL segments (unless there are only a few partials on each image).
Note that when using data from two segments widely separated in phi, it is possible that the crystal orientation will have changed sufficiently that the orientation matrix for the first segment of data does not accurately predict the first image of the second segment. This can be quickly checked by reading in this image ("Read image" menu option) and then predicting the pattern ("Predict"). If the prediction is poor, there are two things that can be done. Either find spots on this second image and use them (together with the spots from the first image of the first segment) to repeat the autoindexing. This may give a matrix that predicts both images successfully. This should work unless the crystal orientation has genuinely changed between the two images (or the rotation axis is not normal to the X-ray beam). If this doe not work, you should derive a new orientation matrix for image from the second segment image. Remember to change the name of the file that the orientation matrix will be written to. REMEMBER to delete all the spots used to autoindex the first image if you have not already done so, or use the "Select images" menu option to choose only spots from the second image. Then use the "Autoindex" option to get an orientation matrix for this image. Under these circumstances, it is best to FIX the cell parameters for the autoindexing to those determined for the first segment of data (not yet possible for DPS indexing). This is because only a single set of cell parameters is allowed (for all segments) when doing the post-refinement. The "Refine cell" procedure allows you do define a separate orientation matrix for each segment of images.
Because the post-refinement uses partially recorded reflections, it is important to have a realistic estimate of the mosaic spread BEFORE starting post-refinement. In particular, if no value has been supplied (ie the mosaic spread is zero) the program will issue a warning message because it is unlikely that the post-refinement will work. Use the "Estimate mosaicity" menu item to obtain an initial estimate of the mosaic spread. The postrefinement will give a refined estimate of the mosaic spread, but this is not very reliable for mosaic spreads greater than about 0.7 degrees.
To use this option, the keyword :
POSTREFINEMENT SEGMENT <number of segments>
should be used, followed by PROCESS keywords defining the images to be included in each segment, with each PROCESS (see 5.3.1) keyword followed by a RUN keyword.
NEWMAT postref_3seg.mat ! Defines the filename for the new matrix POSTREF SEGMENT 3 PROCESS 1 3 [ ANGLE 1.0 START 0.0 ] RUN PROCESS 43 45 [ ANGLE 1.0 START 42.0 ] RUN MATRIX test_88.mat PROCESS 86 88 [ ANGLE 1.0 START 85.0 ] RUN
Would use 3 segments of data (with phi values 0-3,42-45,85-88.) Note that a new MATRIX keyword has been given for the last segment, which could be necessary if the crystal has slipped during data collection. See section 5.1.1 for the best procedure to use when deriving an orientation matrix for the second or subsequent segments.
Note that the procedure uses only partially recorded reflections, and so in this case it would use partials then span images 1 and 2, 2 and 3, for the first segment etc. For this reason the PROCESS keyword MUST specify at LEAST 2 images, e.g.
PROCESS 1 1 ANGLE 1.0 START 0.0
would provide NO data for post-refinement.
If the sum of the beam divergence and mosaic spread is more than twice the oscillation angle, use the POSTREF MULTI keywords.
5.1.3 What the program actually does
During postrefinement, the images are not fully integrated (only the intensities of partially recorded reflections are measured, and by summation integration rather than profile fitting) so there is no output generate file or MTZ file. The crystal orientation will be refined for every image independently, but the cell parameters will only be refined once the final segment of data has been processed
(Note that the very last image (88 in the example above) is apparently (from the logfile) not measured at all...this is NOT an error, since the intensities of the partials at the start of image 88 are obtained while processing image 87.)
If the cell parameters change by more than 2.5 standard deviations from the input values, all images will be remeasured using the updated cell and another round of cell parameter post-refinement will be carried out. This will happen up to a maximum of 4 repeats. It is quite common that two or even three complete rounds of integration are required for convergence. For this reason it is not a good idea to include too many images in the refinement. A target of between 500 and 2000 reflection in the refinement is perfectly adequate.
It is recommended that the final cell parameters are then used to integrate all the images in the dataset, fixing the cell parameters in the post-refinement:
POSTREF FIX ALL
Note that if the crystal has been slipping during data collection, it is possible to provide different MATRIX keywords for each segment of data, and supply a new orientation (eg derived by autoindexing the first image of the segment). When doing this, the orientation matrices for all segments (including the first) SHOULD BE OBTAINED FROM THE SAME INTERACTIVE RUN OF MOSFLM. This ensures that the matrices for the second and subsequent segments are all referred relative to the orientation matrix for the first segment. It is also a good idea to FIX the cell parameters when autoindexing the images from the second and subsequent segments, as only one set of cell parameters is allowed when refining the cell by post-refinement. It is also possible to provide new crystal identifiers for each segment (eg if the crystal has been translated and the images given a different identifier). It is also possible to use data from different crystals, but in this case there is the restriction that the orientation of the crystals must be the same (to within 20 degrees) and the relative phi values must be correct. Providing the different crystals are all indexed in the same run of MOSFLM, the relative phi values are taken care of automatically.
A possible complete example is then:
TITLE Refine cell with 3 segments DIVERGENCE 0.35 0.2 SYMMETRY 96 [DISTANCE 124.1] [WAVELENGTH 1.542} DIRECTORY /scr0/andrew/ BEAM 89.33 90.10 GAIN 1.2 NEWMAT postref_3seg.mat POSTREF SEGMENT 3 IDENT oval1 MATRIX oval1.mat PROCESS 1 3 [ANGLE 1.0 start 0.0] RUN IDENT oval2 MATRIX oval43.mat PROCESS 43 45 [ANGLE 1.0 START 42.0] RUN IDENT oval3 MATRIX oval86.mat PROCESS 86 88 [ANGLE 1.0 START 85.0] RUN
When doing post-refinement, the crystal orientation around the X-ray beam direction (the X axis) is not defined (the refinement is based solely on the observed degree of partiality and not on the positions of the spots) and this parameter is therefore not refined, but missetting angles around Y and Z axes are refined (see Appendix IV for a definition of coordinate frames). The refinement of the detector parameter CCOMEGA allows for crystal slippage around the X-ray beam direction.
If only a narrow angular wedge of data is available for a low symmetry spacegroup (orthorhombic or lower) it is possible to FIX cell parameters that are not well defined (those closest to the direction of the X-ray beam)
eg POSTREF FIX A
In the great majority of cases the post-refinement will provide accurate cell parameters without any user intervention (providing the mosaic spread estimate is realistic). There are, however, some special cases where additional input is required to get the best results.
It is not uncommon to observe diffuse scatter on the images, particularly for data collected at a synchrotron source. Sometimes this takes the appearance of a "halo" around the Bragg spot, because the intensity of some types of diffuse scatter peak at the positions of the Bragg reflections. This can cause difficulties in post-refinement, because it has the same effect as a crystal with a very large mosaic spread. Under these circumstances, it is best to refine the cell parameters using spots that are close to half-recorded, as the refinement is then less sensitive to the model for the "rocking curve". The minimum and maximum fraction recorded can be specified as shown below:
POSTREF FRMIN 0.4 FRMAX 0.6
will only use reflections that are between 0.4 and 0.6 recorded. (Default is 0.1 to 0.9).
Back to Contents Page
6: Collecting data and processing the images
6.1 Overview 6.2 Special MOSFLM features 6.2.1 Accumulating profiles over several images 6.2.2 Addition of partials (ADDPART) 6.2.3 Post-refinement of orientation and cell parameters 6.2.4 Optimisation of measurement box parameters 6.3 Running a processing job 6.3.1 Running MOSFLM interactively 6.3.2 Processing the first block of data) (Non-interactively) 6.3.3 Finally, Processing the dataset
Before starting the serious data collection, integration of one or more images should be carried out to determine:
a) Is the crystal single?
There are 4 features of MOSFLM which are unusual and require explanation. These are:
In order to form well defined standard profiles (which are then used to evaluate the profile fitted intensities) fully recorded (or partially recorded) reflections over several images are added together. This improves the signal to noise and results in a better determined profile. The number of images used to form the profiles (usually between 5 and 10) is determined automatically by the program (in a way that avoids having just a few images in the final block). It can also be set manually by the BLOCK subkeyword on the PROCESS keyword line.
The positional refinement for all images in a block is carried out prior to forming the standard profiles and integrating the images. Thus each image is processed in two passes, the first pass for the positional refinement and writing all the "measurement boxes" for the spots to the SPOTOD file, and the second for actually evaluating the reflection intensities.
The program has the option to add together the measurement boxes of the two halves of partially recorded reflections on adjacent images, thus giving the equivalent fully recorded reflection which can then be used to form standard profiles or for positional refinement of the detector parameters.
To make use of this option, the keyword:
should be given. (The default is now NOT to add partials).
Note that this procedure, which involves adding pixel values on two adjacent images, involves two assumptions:
That the images have the same effective exposure time (ie total incident flux). If the rate of rotation of the spindle axis is determined by the ionisation chamber reading (as it may be on the MAR detector) then this assumption should be met. If not, then there may be an error introduced by this procedure especially if the incident beam is rapidly decaying (eg on an unstable synchrotron source). If post-refinement is being used (and by default it is used) then the program will print a warning message (to the summary file and the end of the logfile) if the exposure varies by more than 5% from one image to the next (as judged by the X-ray background).
That the detector origin, orientation etc is identical for successive images, and that the images are exactly abutting (ie no overlap in rotation angle). These conditions will normally be met by the Mar, R-axis and Mac Science scanners, but mechanical wear can lead to the scanner not locking into the correct "home" position after a scan (it does one more or one too few rotations). This will show up as a variation in the ROFF distortion parameters in units of one pixel (0.15mm). The program keeps track of variations in ROFF,TOFF and CCOMEGA and will give a warning message if undue variation is detected.
**** IMPORTANT *****
If either of these assumptions is not met (this will be indicated by warning messages) then the ADDPART option should not be used.
With ADDPART, what are actually partially recorded reflections over 2 images are reclassified as fully recorded when stored in the MTZ file and they will therefore be used in scaling (SCALA). However, summed partials do carry a special flag, so that they are still classified as partials in the statistical analysis in SCALA. Thus information on partial bias, for example, is still available.
Because of the ability of SCALA to scale data when there are no fully recorded reflections, the use of this option less important than it once was. Because its use depends on the assumptions listed above, which may not always be met, the DEFAULT is now NOT to add partials.
By default the program will refine both cell parameters and crystal orientation using post-refinement during integration of the images. However, it is in fact preferable to determine accurate cell parameters prior to integration using the Refine cell menu option for interactive work or the POSTREF SEGMENT option in a background job. The resulting cell parameters are then input using a CELL keyword and the cell is NOT refined during integration (by using keywords POSTREF FIX ALL). This will refine the crystal orientation (and mosaic spread) but not cell parameters.
If cell parameters are refined in a processing job, the way in which the refinement is carried out depends on the crystal spacegroup. For crystals of trigonal or higher symmetry data from each pair of images in turn is used in the refinement. (This is equivalent to the POSTREF SINGLE mode.) Thus cell parameters, crystal orientation and mosaic spread are refined after every image using intensities on that image and the next one in the series. (For off-line scanners, reflections on the current image and the preceeding image are used).
For lower symmetry this is not recommended, because not all the cell parameters will be well defined using data from only one pair of images. Thus for orthorhombic and lower symmetries data is accumulated from a number of images and only then will cell parameter refinement be carried out (the crystal orientation is still refined after every image as this is well defined). By default, the number of images required for the cell parameter refinement (NADD) is set to correspond to a rotation of 10 degrees. However, this can be changed using the WIDTH subkeyword. Thus:
POSTREF WIDTH 15
specifies that 15 degrees of data must be accumulated for post-refinement of cell parameters. The actual WIDTH of data required for a satisfactory refinement will depend on the resolution (the higher the resolution, the fewer images are required) and the strength of the data (the weaker the data, the more images are required). Some experimentation may be required to find a WIDTH that gives a stable refinement. If the refinement appears unstable (ie large shifts in cell parameters) the WIDTH should be increased. If this is not possible (eg only a limited number of images have been obtained from the crystal before radiation damage set in) then the refinement of some or all cell parameters should be turned off. Thus
POSTREF FIX ALL
will fix all cell parameters.
POSTREF FIX C
will fix the "c" cell parameter etc. Normally one would fix the cell parameter that is closest to being parallel to the X-ray beam as this will be the least well defined. Alternatively, look at the standard deviations of the cell parameters to see which one(s) are least well defined. Normally the cell parameters obtained from autoindexing are quite adequate to measure 10-20 degrees of data from the image on which the autoindexing was run.
Once the appropriate number of images (NADD) have been processed, and the cell parameters have been refined for the first time, if there is a large shift in any cell parameter the program will start processing from the first image again, using the updated cell parameters. (The maximum shift allowed is determined by the subkeyword SHIFTFAC..thus
POSTREF SHIFTFAC 5
sets the maximum shift to 5 standard deviations...if larger than this the images will be reprocessed. The default value is 2.5.
From this point on, the cell parameters will be re-refined after every image, using data from the previous NADD images. For example, with 1 degree oscillation images and a width of 10 degrees, the first cell refinement will be carried out after processing image 10, using data from images 1 to 10. After processing image 11, cell parameters will be refined using data from images 2-11 etc. etc.
The missetting angles should ALWAYS be refined by post-refinement, but it may be necessary in some cases to suppress or limit refinement of cell parameters if the refinement is not stable.
The crystal mosaic spread is also refined by default, but the refined value IS NOT USED BY DEFAULT. This is because if the refinement is unstable, this can have rather drastic effects on the processing. If the refinement is stable, and there is evidence for a change in mosaic spread during the run (this often results from radiation damage), the refined values should be used by including the subkeyword USEBEAM:
If you wish to refine the horizontal and vertical beam divergence independently (good data is required to do this) use BEAM 2 :
POSTREF BEAM 2
Again, you need to include USEBEAM to actually make use of the refined values.
By default the program will automatically determine the best measurement box parameters. It will first determine the spot size from spots in the centre of the image (parameters for this search are set by keyword SPOT). This information is used to set initial sizes for the overall dimesnions (NXS,NYS in figure below) and the corner and rims parameters (NC,NRX,NRY). Following detector parameter refinement using spots from the centre of the first image, the program will then optimise the rim and corner parameters NRX,NRY and NC.
<------------------ NXS = 23 ---------------> ^ - - - - - - - - - - - - - - - - - - - - - - - ^ ! - - - - - - - - - - - - - - - - - - - - - - - NRY =2 ! - - - - - - - - - - - - ^ ! - - - - - - - - - - ! - - - - - - - - ! - - - - - - ! - - - - - - ! - - - - - - NYS =17 - - - - - - ! - - - - - - ^ ! - - - - - - ! ! - - - - - - ! ! - - - - - - - - ! ! - - - - - - - - - - NC =8 ! - - - - - - - - - - - - ! ! - - - - - - - - - - - - - - - - - - - - - - - ! ^ - - - - - - - - - - - - - - - - - - - - - - - ^ <NRX> = 3
Figure 1. The measurement box used in MOSFLM. NXS and NYS (odd integers) define the overall size of the measurement box in pixels. NRX and NRY define the widths of the background rim and NC defines the corner cutoff. In the figure a "-" denotes a background pixel, all other pixels belong to the peak. There is no "safety rim" between peak and background.
The algorithm employed is as follows. The parameters NRX, NRY, NC are varied in turn and the value giving the highest ratio of the integrated intensity I to the standard deviation in the intensity sigma(I) is found. This is the notional optimum value for that parameter. The total intensity for this value is checked, and if it is less than the maximum intensity (for any value of the parameter) by more than a factor 0.01 (TOLERANCE), then that parameter is decreased by up to IBOUND pixels.
For example, the max I/sigma(i) might be found for a X rim value of 4, but the intensity might be only 97% of the maximum intensity found for any value of NRX (eg 1). NRX will therefore be decreased, one pixel at a time, and for each value the integrated intensity tested against the maximum value. If for NRX=2, the intensity is within 0.01 (ie 1%) of the maximum value, then 2 will be taken as the optimal value for NRX.
Thus it can be seen that the higher the TOLERANCE parameter, the SMALLER the optimised peak area will be. It is difficult to define a "correct" value for TOLERANCE, because this will depend on the degree of diffuse scatter associated with the Bragg peaks and how well adjacent spots are resolved. Values between 0.01 and 0.04 are typical, it should NOT be necessary to use values above 0.04. Note that two values may be supplied to the TOLERANCE keyword. In this case the first value is used for profiles in the centre of the image (closest to the direct beam) and the second value for the outermost profiles. An interpolated value is used for other profiles. The default value for the innermost profile is 0.01. For very close spots this can be increased to 0.02 (rarely larger).
For the first round of this iteration, when optimising NRX and NRY, NC is set to zero. NRX and NRY are varied from 1 to a maximum value which would give a peak dimension of 5 pixels. NC is varied from the smaller of NRX and NRY up to the smaller of (NX-2) and (NY-2).
Two rounds of optimisation are performed, the second round using the results of the first.
The optimisation is first carried out on the average spot profile for the central region of the detector. The optimisation of the overall dimensions (NXS,NYS) is only carried out at this stage. The background rim parameters are optimised for ALL the standard profiles.
The background rim parameters are reoptimised for each new BLOCK of images.
If the optimisation of the standard profiles causes problems (because of unusual spot shapes with long tails or other features) it can be suppressed using keywords:
In this case the measurement box parameters will still be optimised for the average spot profile using spots from the centre of the detector (this profile is NOT used for integration). This box will then be expanded automatically to allow for the increase in spot size due to obliquity of incidence on the detector, but the measurement box parameters will NOT be optimised for the standard profiles (one for each area of the detector) that are used for integration. To suppress the optimisation of the measurement box parameters altogether (so that the program will use the parameters supplied on the RASTER keyword), give the keywords:
PROFILE NOOPTIMISE ATALL FIXBOX
To just suppress the optimisation of the overall size of the measurement box (parameters NXS,NYS) include keywords:
Normally at this stage one would go straight on to process the first BLOCK of images (See "6.3.2 Processing the first block of data" below).
The following keywords might be used for an interactive run. Before starting MOSFLM, it is convenient to edit them into a file (eg comm) to save typing them several times. Then at the mosflm prompt simply type:
and it will read the commands from the file@comm
The following are optional, if not given, the program will set suitable defaults.TITLE Processing test data ! Crystal parameters MATRIX oval_2_3.mat SYMMETRY 96 MOSAIC 0.1 ! image parameters IDENT oval PROCESS 1 TO 1 [ ANGLE 1.0 START 0.0 ] DIRECTORY /scr0/andrew/ EXTENSION image ! beam parameters DIVERGENCE 0.35 0.2 POLARISATION MIRRORS ! detector parameters BEAM 89.33 90.10 BACKSTOP CENTRE 88.5 91 RADIUS 14 GAIN 1.2 ! The following are read from the image header if not supplied on ! keywords for Mar, ADSC, RaxisIV and Mac Science. The phi values (on ! PROCESS keyword) will also be read from the header if not supplied. DISTANCE 124.1 WAVELENGTH 1.542
!HKLOUT oval.mtz !SEPARATION 1.3 1.3 !RASTER 17 17 9 3 3 !GENFILE oval_1to1.gen !RESOLUTION 3.0 PLOT RUN
*** NOTE WELL ***
If the data has been collected at a synchrotron source, the polarisation of the beam and the horizontal and vertical divergences (horizontal here means in the plane of the X-ray beam and the rotation axis) should be given. Values default to those for the SRS at Daresbury, UK.
The TITLE is written to the mtz and generate files.
MATRIX is the filename for the orientation matrix derived from a previous autoindexing or cell parameter post-refinement run. If you want to override the cell parameters or missetting angles in this matrix use the CELL and MISSETTS keywords respectively.
SYMMETRY gives the space group of the crystal, either as the name or the number in International Tables. Note that axial systematic absences (eg 0k0 with k odd in spacegroup P21) are measured by MOSFLM, so that the symmetry can be checked. Lattice absences however (due to face or body centring) will NOT be measured.
The IDENTifier (oval) is used as a template for the image file names, which have the form:
for image number 3 for example. There is an absolute limit of 40 characters for IDENT. The extension (image in this case) is set using the EXTENSION keyword.
The template keyword is an alternative to the IDENT keyword. In this case:
would work identically.
PROCESS gives the images to be generated, in this case from image 1 to image 1 (ie only one image is going to be examined), with a rotation angle of 1.0 degrees, starting at phi=0 (relative to the phi values given in autoindexing). Note that for Mar Research, ADSC, RaxisIV and Mac Science scanners, the phi values need not be given, they will be taken from the image header.
DIRECTORY gives the directory name where the images are stored (up to 10 different directories can be given on one or more DIRECTORY keywords).
EXTENSION defines the extension of the image filenames (default is "image" for Mar Research scanners, "osc" for R-axis, "ipf" for Mac Science, "cor" for ESRF CCD, and "image" for unrecognised detectors.
DIVERGENCE... if two values are given, they are the horizontal and vertical beam divergences (which will differ if a monochromator is used). Only a single number need be given for isotropic divergence. "Horizontal" in this context actually means in the plane containing the rotation axis and the X-ray beam, which is horizontal in the case of the Enraf Nonius oscillation camera and the Mar Research IP scanners, but vertical for standard Raxis machines.
POLARISATION specifies the polarisation of the X-ray beam, and can be given as PINHOLE or MIRRORS (both specify an unpolarised beam), MONOCHROMATOR (for a GRAPHITE monochromator) or SYNCHROTRON followed by the degre of polarisation (0.86 for SRS).
BEAM defines the direct beam position, in mm, relative to the position of the first pixel in the image. This can be determined by taking a wax image (or plasticine) and measuring the centre of the circles using the X-windows display.
Special note for Raxis II scanners: The definition of the detector coordinates in the R-axis software is different to that adopted in MOSFLM. Thus if the direct beam coordinates have been obtained from the R-axis software, then the X and Y coordinates must be interchanged.
BACKSTOP Defines the centre and radius of the backstop shadow. Reflections lying within this circle will not be integrated. The position and size of the shadow are best determined using the X-windows display.
GAIN defines the gain (adc units per X-ray photon) of the detector. This should be constant for a given detector (and a fixed wavelength). It is CRUCIAL to have a reasonable estimate of the gain as many aspects of the program use counting statistics derived standard deviations to determine acceptable spots for refinement, profiles etc. The correct value of the gain should give a BGRATIO of unity (the BGRATIO is printed as part of the MOSFLM output, as a function of intensity). The actual value of BGRATIO obtained can be used to get an improved estimate of the gain using the relationship:
true gain = estimated gain * (bgratio)**2
The gain is typically between 1 and 2, but can be as high as 5 for Raxis II detectors. See section 8.1 for a way of estimating the GAIN of your detector.
IMPORTANT. The GAIN should not be interpreted too literally. The way it is derived (section 8.1) is only strictly correct if all pixels are independent, which in practice they are not. For this reason, this parameter should NOT be used to assess the relative performance of different detectors.
DISTANCE is the crystal to detector distance in mm.
WAVELENGTH is the radiation wavelength (defaults to 1.5418).
HKLOUT gives the name of the output mtz file. This contains the Lp corrected intensities and standard deviations, with the reflection indices reduced to the asymmetric unit. This file can be used (after sorting) as input to the CCP4 programs SCALA. HKLOUT can also be given on the command line, but if both are given that specified by the keyword takes precedence. If not given, the filename is made up from the image identifier and the first image number, so in this case would be "oval_001.mtz".
SEPARATION (in mm in detector directions X and Y, ie horizontal and vertical for the Mar IP scanner) gives the minimum allowed separation of two spots before they are flagged as spatially overlapped (spots are treated as being ellipsoidal in shape, the numbers given being the full axial lengths in the X and Y directions). No attempt is made to integrate spatially overlapped reflections. If not given, the program will work out suitable values based on the spot size in the centre of the image. It will also determine if the "CLOSE" option needs to be used (see SEPARATION in the helpfile for more details). For spots that are not, in fact, completely resolved, the values determined by the program may be too conservative and lead to a very large number of spots being rejected as overlapped. In such cases, the SEPARATION should be defined explicitly.
RASTER gives the parameters of the measurement box (see Fig. 1 above). As explained in section 6.2.4 above, these values will be determined automatically if not supplied.
GENFILE specifies the generate filename. If not given, it will default to the MTZ filename, but with the suffix ".gen"
RESOLUTION: If not given, the resolution is set by the physical size of the detector. Both high and low resolution limits can be given. A "dynamic" high resolution limit, which depends on the mean I/sig(I), can be set using the CUTOFF keyword. A specific resolution range can also be excluded (eg to eliminate an ice ring) with the EXCLUDE keyword.
PLOT invokes the X-window interactive graphics option
RUN will start the processing
The image will be displayed with the predicted pattern overlaid. Fully recorded reflections are displayed as blue boxes, partials as yellow boxes, spatial overlaps as red boxes and reflections rejected as being too wide in phi (default 5 degrees, can be reset with keyword MAXWIDTH) as green boxes. Clicking (left mouse button) on the centre of a box will result in the reflection indices, phi value and phi width being displayed in the "Output" window. If examining the image after integration, the profile fitted intensity and standard deviation will also be given. See below for more details on examining the image after integration.
The image should be examined carefully to ensure that the predicted pattern actually matches what is on the image. If it does not, then any of the relevant parameters (cell dimensions, missetting angles, beam divergence, etc etc) can be adjusted and the pattern re-predicted (use the predict menu item). A brief description of the various menu options is given below:
Predict If the cell dimensions or any other parameter in the "Display Parameters" window is changed, selecting this menu item will re-calculate the predicted reflections and display them.
Clear prediction This will delete the predicted pattern. It can be restored by choosing the "Predict" menu item.
Adjust If there is an error in the beam coordinates or camera constants the calculated pattern will be displaced relative to the observed pattern. The "Adjust" option allows this to be corrected. The mouse is used to input the calculated and the observed positions of two spots. From this the program calculates the shift, rotation and scale factor required to superimpose these two spots. The values of the shifts required are given and the user given the choice of accepting the transformation or not.
Auto-refine This will refine the crystal missetting angles using the AUTOMATCH option (see help library for more details), which essentially adjusts the missetting angles to try to optimise the fit of the predicted to the observed pattern. This can converge from initial errors of 1-2 degrees, but the final parameters are NOT as accurate as those obtained from post-refinement. With the use of REFIX, this option should not normally be necessary. Note that it will use the default parameters for the refinement (eg only using data to 6A). You may wish to modify these using the appropriate keywords...see help library documentation. After refinement it will go on to measure the image. **** THIS OPTION IS NO LONGER SUPPORTED ****
Integrate This will close down the display and measure the image in the normal way. You are given the option of displaying the image again after positional refinement has been carried out, or after the integration has been carried out. (See below)
Find hkl If this menu item is activated, the user is prompted for the hkl indices of the spot he wishes to find. A blue cross is drawn on the position of the spot. A warning is given if the spot does not lie in the displayed part of the image. This can be useful in identifying bad spots.
Pick This will display the actual pixel values in a box around the cursor position (the size of the box can be set in the "Display Parameters" window.
Measure Cell Allows measurement of cell parameters, but the distance and wavelength must be set correctly.
Circles Puts up resolution circles
Beam/ backstop Will determine the centre of a circle defined by clicking with the mouse at a series of points lying on the circle. After selecting "Fit circles" select a series of points with the mouse and then selet "Fit points". The rms fit, radius and centre of the circle will be given. The user has the option to update the direct beam coordinates to the circle centre. Used to determine the direct beam position from wax rings.
EXIT Closes down the display. If the image was being displayed with the IMAGE keyword, the mosflm prompt will return. If all keywords for processing are given, then MOSFLM will proceed to measure the image(s).
Examining the image after integration
There is the option to update the display after integration (At the bottom of the "Processing Parameters" window, this is one of a number of On/Off or Yes/No toggles). If this option is chosen, once the profiles have been determined and the image integrated, the image plus the predicted pattern will again be displayed again. (Note that there is an overhead associated with this, because the image will have to be read into memory again (unless only a single image is being processed)).
If there are any "bad spots" (ie poorly measured reflections) on the image a window will be displayed which gives the user has the option to examine and/or edit the badspots. If this option is selected, the image will be displayed with a new menu option "Bad spots". Bad spots can then be reclassified as acceptable and other (accepted) spots can be re-classified as rejected.
In addition to the predicted reflections, vectors will be drawn indicating the difference between the predicted and observed spot positions for FULLY RECORDED reflections (these vectors are in red....it may be necessary to use the "Clear Prediction" menu option to see them clearly. The vectors can be scaled using the "Vector scale" menu item in the Processing parameters window. Also a minimum intensity threshold for the display of these vectors can be set using the "Threshold" menu item.
The vectors will of course be longer for weak spots than strong ones, but for all reflections the direction of these vectors should be random. If this is not the case, it suggests errors in crystal cell parameters or orientation, or misclassification of fully recorded/partially recorded reflections, or the existence of spatial distortion which is not being correctly modelled.
"Badspots" will be indicated as red crosses, rejected reflections as blue croses. Rejected reflections will normally be those containing a zero pixel value (because the measurement box extends outside the scanned area of the image plate); these are NOT classified as "badspots". They may also arise if a very large number of background pixels have been rejected.
Overloaded reflections will be indicated as green crosses. Note that you MUST include keywords PROFILE OVERLOAD in order to estimate the intensities of overloaded reflections by profile fitting.
By clicking on a reflection, the LP corrected profile fitted intensity and standard deviation will be given in the output window.
It is usually advisable to process a block of (say) 10 degrees of data prior to processing the complete dataset (as this is quite time consuming) just to check that the processing is satisfactory.
The commands for MOSFLM might now be:
TITLE Procesing test data ! Crystal parameters MATRIX oval_2_3.mat SYMMETRY 96 MOSAIC 0.1 ! image parameters IDENT oval PROCESS 1 TO 10 [ ANGLE 1.0 START 0.0 ] DIRECTORY /scr0/andrew/ EXTENSION image ! beam parameters DIVERGENCE 0.35 0.2 POLARISATION MIRRORS ! detector parameters BEAM 89.33 90.10 BACKSTOP CENTRE 88.5 91 RADIUS 14 GAIN 1.2 DISTORTION ROFF 0.3 TOFF 0.1 ! The following are read from the image header if not supplied on ! keywords for Mar, ADSC, RaxisIV and Mac Science. The phi values (on ! PROCESS keyword) will also be read from the header if not supplied. DISTANCE 124.1 WAVELENGTH 1.542 !The following are optional, if not given, the program will set !suitable defaults. !HKLOUT oval.mtz !SEPARATION 1.3 1.3 !RASTER 17 17 9 3 3 !GENFILE oval_1to1.gen !RESOLUTION 3.0 PLOT RUN
See above (6.3.1 Running MOSFLM interactively) for a description of each of the keywords.The only difference to the commands described above is that the PROCESS keyword has been set up to process the first 10 images. The ADD subkeyword on the PROCESS line specifies that the batch number on the output mtz file should be (1000+image number) (ie 1001-1010 in this example).
DISTORTION specifies the ROFF and TOFF values for this scanner (See Appendix IV). It is not normally necessary to specify these values unless thay are large (greater than 0.3).
The program will then form the standard profiles by summing reflections over the first block of images 1 to 5 and print the resulting profiles. The number of images in a block is set by the program, but may be set explicitly by the PROFILE BLOCK keywords).
The standard profiles are determined in a number of areas across the detector. By default the detector is divided into 9 regions for data to a resolution lower than 2.5A and 25 regions of which only 22 lie within the active area of a circular detector for resolution higher than 2.5A. Alternatively the user can define the set of lines parallel to the detector X and Y axes which define the standard areas. This is done with keyword PROFILE XLINES... YLINES...
PROFILE XLINES 0 45 90 135 180 YLINES 0 45 90 135 180
will divide the a detector 180x180mm into 16 areas. See MOSFLM Help file for more details.
A separate standard profile is evaluated for each of these areas.
The program prints out some statistics on the standard profiles, followed by statistics on profiles that it has averaged (if any) and followed by a representation of each of the standard profiles using a single character (0- 9, then A-Z) to represent the value at each pixel (A [ denotes a negative value). In these representations, a minus sign denotes the background region, and a * denotes rejected pixels. Background pixels which are overlapped by the peak regions of neighbouring spots are automatically rejected by the program. It will also warn you if the peak regions of neighbouring spots overlap.
Each standard profile has to satisfy two criteria before it is considered acceptable. There must be at least ten contributing reflections, and the rms variation in the background plane (after rejecting outliers) must be less than 10 (after scaling the profile to a maximum value of 255). If a profile fails to pass either test, then it is averaged using the profiles from neighbouring areas on the detector. Profile averaging should be avoided if at all possible. The averaging inevitably produces a profile that is less broad than the original profile because it is dominated by the stronger, lower resolution data. Look at the printed profiles before and after averaging to confirm this.
Accumulating the profiles over a BLOCK of say 10 images (see below) should help provide a sufficient number of reflections, but is unwise to accumulate over too wide a phi range because this will average out any genuine variation in the profiles with phi (eg due to a change in effective diffracting volume). Both rejection criteria can be changed using subkeywords (NREF for number of reflections, RMSBG for rms variation in background, on the PROFILE keyword line) and it is usually better to avoid averaging by changing these criteria if necessary:
PROFILE RMSBG 20 NREF 5
The program will give a warning if it detects that the peak areas of adjacent spots overlap. There are two possible ways around this:
1) Increase the SEPARATION parameters. Making the separation significantly smaller than the actual spot size in the centre of the image can lead to serious problems and is NOT recommended.
2) The actual spot size that the program works with when testing for peak overlaps (after rejecting those that are too close as determined by the SEPARATION parameters) is determined by the "profile optimisation"...that is when the program works out the best values of the measurement box parameters NC, NRX, NRY, which is done independently for each of the standard profiles. If there is significant diffuse scatter on the image, the "optimised" raster parameters may well produce a peak area that is actually slightly broader than the true Bragg peak and includes part of the "diffuse" peak. This can be checked by examination of the standard profiles...if the peak area contains many pixels with values of 0 or 1 then it suggests the peak is too broad. This effect can be overcome by increasing the TOLERANCE parameter (See the help library for more details on how the optimum parameters are derived and the effect of the TOLERANCE parameter). The default value for this parameter is 1% ie 0.01. Increasing it (try steps of 0.005, but it should not be necessary to go above 0.04) will result in a reduction of the optimised peak size. It is up to you to decide what the optimimum value is on the basis of the appearance of individual spots in the image.
The other statistics produced are for general information, and are described in the MOSFLM help library under "Output". Probably the most useful is the breakdown of I/sig(I) as a function of resolution. This will give an immediate idea of the quality of the data...particularly at the high resolution end. For guidance, a mean I/sig(I) of 3.0 will give an R-merge of between 20% and 30% in SCALA. If there are symmetry related fully recorded (or summed partial) reflections on a single image, statistics are also provided on the agreement between their intensities.
Check the following in this job:
1) Check the standard profiles look OK (ie the peak is within the peak region).
2) Check the weighted residual is about 1.0.
3) CHECK FOR WARNING MESSAGES. These are given at the end of the logfile and in the summary file. They will point out possible problems and suggest a way around them.
The whole philosophy of MOSFLM is to allow the entire dataset (or all images obtained from a single crystal) to be processed in a single job. To make this possible, the crystal orientation can be refined continuously for every image, to take account of possible crystal slippage, and the cell parameters can also be refined if the initial estimates are not accurate. An accuracy of 1 part in 1000 or better is required for optimal processing of high resolution data.
There are a large number of adjustable parameters within MOSFLM, but considerable effort has gone into making the program select an appropriate value for these parameters. The program defaults should therefore ALWAYS be used unless there is a very specific reason for changing parameters (eg if it is suggested in the warning messages in the summary or logfile)
See section 9.3 for a complete example command file.
Back to Contents Page
7: Interpreting the output
The image number (as given on the PROCESS keyword) CCX,CCY,CCOM
The camera constants (in mm and degrees). The magnitude of CCX and CCY reflects the accuracy of the supplied direct beam coordinates. However their actual magnitude is really immaterial (providing they do not exceed your expected error in the direct beam coordinates) but they should remain CONSTANT throughout the data collection (assuming the beam is not moving !). If using the post-refinement option to refine crystal missetting angles, then CCOMEGA may show a gradual drift, since any errors in orientation around the direct beam are taken up by CCOMEGA. DIST
The refined crystal to detector distance. YSCALE
The relative scale factor in the detector Y direction. This should be very close to unity (to within 1 part in 1000 or better). Deviations from unity indicate errors in cell parameters. Note that for the R-AXIS detector the difference in the pixel sizes in the X and Y directions is taken up by YSCALE, which should have a value close to 1.032. TILT,TWIST
Deviations from normal incidence on the detector. TILT is a rotation about a horizontal axis, TWIST about a vertical axis, and the values given are expressed in hundredths of a degree. These values should be close to zero (less than 20) and should be CONSTANT (to within experimental error). ROFF,TOFF
The radial and tangential offsets for the Mar Research and Mac Science scanners only (see Appendix IV) in mm. These should be CONSTANT to within experimental error. Watch out particularly for variations in ROFF by one pixel. This indicates that the limit switch on the scanner is not functioning correctly (this should only occur very rarely if at all). A Warning is given if this happens. RESID
The rms positional residual (in mm) after refinement of the detector parameters. For strong images this should be between 0.02 and 0.04. For weak images or large spots (due to high mosaic spread) it can be significantly higher. If partials have to be included in the refinement it will also be higher. A dataset with rms residuals of 0.2 to 0.3 can still give a final Rmerge of under 10% ! Remember a residual of 0.15 is still only one pixel. If the residual is greater then 0.04 for a strong image, there is almost certainly an error in the cell parameters, and they should be refined using the POSTREFINEMENT options. Even for weaker images, the positional residual for the initial refinement (using only central spots) should be small. WRESID
The weighted residual. This should be close to unity (independent of the strength of the image). Larger values suggest errors in cell parameters or crystal orientation. FULL,PART,OVRL,NEG
The number of fully recorded, partially recorded and overloaded reflections measured on the image (this includes reflections with part of the measurement box outside the scanned region...these are not actually integrated unless the PROFILE EDGE keywords are included, in which case those with at least half of the pixels inside the scanned area will be measured by profile fitting). Overloaded reflections are also not integrated (by default) but if the PROFILE OVERLOADS keywords are included, then their intensity will be estimated by profile fitting the non-overloaded pixels. NNEG is the number of reflections with negative (summation integration) intensity. The proportion of the dataset that falls into this category obviously depends on the strength of the images. BAD
The number of badspots. Reflections will be classified as badspots if they fail any of five criteria: BGRATIO greater than 3, PKRATIO greater than 3.5 (Fully recorded reflections only, and you have the choice of either rejecting the reflection completely (this is the default) or setting the profile fitted intensity and sd. to the summation integration values (REJECTION PKRATIO 3.5 ACCEPT)...see help library), intensity negative and greater (absolute value) than 5 sigma, background gradient too large (background gradient/ average background exceeds 0.03), too few background pixels remaining after rejecting outliers (less than 10). All these criteria (except negative intensity) can be changed using the REJECTION keyword. There should be less than 5-10 badspots on any one image. If there are more it suggests problems. The badspots are listed in the logfile with the information necessary to see why they have been flagged. It may also be helpful to have the pixel values of flagged spots. These can be obtained by using the keywords: REJECTION PLOT. This should enable the source of the problem to be identified. I/SIGI (two columns)
This gives the average I/sd(I) for the whole dataset (first column) and the outermost resolution bin (second column). Rsym
This gives the R-factor (on intensities) for symmetry related fully recorded (or summed partial) reflections on the same image. Nsym
The number of reflections (not the number of observations) included in Rsym. SDRAT
The ratio of the observed agreement between symmetry related reflection intensities to their estimated standard deviations. This should have a value of 1.4 if there are two measurements of each reflection, or very close to unity if four or more. This can be more useful than the Rsym value, as it should not depend on the intensity of the measurements while Rsym will always be higher for weak spots.
Back to Contents Page
8: General tips
IMPORTANT. The GAIN should not be interpreted too literally. The way it is derived is only strictly correct if all pixels are independent, which in practice they are not. For this reason, this parameter should NOT be used to assess the relative performance of different detectors.Appendix IV), using keywords: DETECTOR OMEGA For example, the value for OMEGA is 90 degrees for a Mar IP scanner, but if it was being used with a vertical rotation axis of a goniostat, you would need to give the keywords: DETECTOR MAR DETECTOR OMEGA 0 Note that for RAXIS, DIP and LIPS IP scanners there is a specific subkeyword to specify the orientation of the rotation axis. Default values of OMEGA are 90 for Mar, Raxis IP scanners, 180 for DIP2000 or 2020 or 2030 (assumed to have a horizontal rotation axis), 270 for the ESRF CCD detector (with image intensifier). If you want to know what the default value of OMEGA is for a given type of detector, add the keyword: DEBUG CONTROL. Then in the output file immediately after reflecting the DETECTOR keyword the following line of debug will appear: Machine type: RAXI Model type: RAXISIV INVERTX F SPIRAL F ORTHOG T CIRCULAR F OMEGA 180.0 It should be possible to process data from other detectors but, depending on how the images are written, it may be necessary to write new code to read in the image. See keyword DETECTORS in the help library for further details.
Back to Contents Page
9: example command files
There follow a number of example command files. In general, it is best to let MOSFLM choose appropriate default values for processing, and to only specify additional parameters if you get warning messages suggesting changes (these warning messages are given in the Summary file and at the end of the logfile).
It is usually NOT a good idea to start with someone elses command file, as they have have set some parameters which are not appropriate for your data.
This will normally be done interactively. The commands can be put in a file (eg "runit") and executed by typing @runit at the MOSFLM prompt.
=> TITLE My lysozyme data ! This title is transferred to the ! MTZ file => IMAGE lyso_001.image [PHI 0 TO 1] ! Filename of first image. For Mar, ! ADSC, Mac Science and RaxisIV images ! the phi values will be taken from ! the image header if not given here. => BEAM 150.0 149.0 ! Direct beam coordinates If not a Mar Research IP scanner: => DETECTOR RAXISIV ! or RAXIS (for RAXIS II) or DIP2000 etc If not processing Mar Research, R-axis or Mac Science images: => WAVE 0.91 ! For Mar, ADSC,RaxisIV and Mac Science this => DISTANCE 300 ! information is taken from the header ! but can be overwritten using the ! keywords. => SYMM p43212 ! If known, give cell and symmetry => CELL 79 79 38 ! otherwise omit completely. Not essential for first stages, but needed for integration => DIVERGENCE 0.1 0.03 ! If isotropic, the beam divergence ! can be included in the mosaic spread. => SYNCHROTRON POLARIZATION 0.9 ! Defaults to 0.86 (SRS, Daresbury UK) => GAIN 1.7 ! See section 8.1 for a way to ! estimate the gain if not known. => GO
Further options are then usually invoked via the menu of the X-window interface.
This example assumes that an orientation matrix has been obtained for the first image, and that accurate cell parameters are to be determined using two (one can use one or more) segments of data. Note that this can be done interactively via the X-windows menu, the example given below is for a background job.
Possible additional keywords:
1) If there is significant diffuse scatter in the image, or if the mosaic spread is very large (greater than 0.5 degrees) it is usually best to limit the post-refinement to using reflections that are nearly half-recorded, using the FRMIN, FRMAX keywords. This will make the refinement less dependent on the model of the rocking curve:
eg POSTREF FRMIN 0.4 FRMAX 0.6
2) If there is an ice ring or spots on the image, all spots within a specified resolution limit can be rejected.
eg RESOLUTION EXCLUDE 3.66 3.72
This example assumes that an accurate cell has already been obtained (using a POSTREF SEGMENT run) so no further refinement of cell parameters is required. Note that integration can be done interactively via the X-windows menu, the example given below is for a background job.
ipmosflm spotod /scr0/andrew/f1adpx3_1to90.spotod \ summary f1adpx3_1to90.sum \ coords /scr0/andrew/f1adpx3_1to90.coords \ << eof-ipmosflm TITLE Postrefining the cell with two segments ! Source parameters WAVE 0.91 ! For Mar, ADSC, RaxisIV and Mac Science this ! information is taken from the header ! but can be overwritten using the ! keywords. SYNCHROTRON POLARISATION 0.86 ! Default polarisation is 0.86 (SRS) DIVERGENCE 0.10 0.02 ! Horizontal and vertical divergence DISPER 0.00020 ! Wavelength dispersion ! Detector parameters DETECTOR RAXISIV ! If not a Mar Research IP scanner: ! can be RAXIS (for RAXIS II), DIP2000 etc BEAM 150.0 149.0 ! Direct beam coordinates GAIN 1.2 ! Detector gain DISTANCE 300 ! For Mar, ADSC, RaxisIV and Mac Science this ! information is taken from the header ! but can be overwritten using the ! keywords. BACKSTOP CENTRE 148 151 RADIUS 12 ! Beamstop shadow ! Crystal parameters SYMMETRY P212121 MATRIX f1adpx3_postref.mat ! orientation matrix previous job. MOSAIC 0.22 ! Mosaic spread, should be a reasonable estimate ! Image parameters IDENT f1adpx3 ! Sets template for image filenames DIRECTORY /scr1/andrew/images/ ! Directory where images are stored ! Processing parameters POSTREF FIX ALL ! do not refine cell, only crystal orientation PROCESS 1 to 90 [START 0 ANGLE 1] ADD 1000 ! Images to be integrated. ! For Mar, ADSC, RaxisIV and Mac Science ! the phi values are taken from the header ! but can be overwritten using the ! keywords. The batch numbers in the output ! MTZ file will be the image number plus 1000 ! (ADD keyword). HKLOUT f1adpx3_1to90.mtz ! Name of output MTZ file. GO END eof-ipmosflm # Delete temporary files /bin/rm /scr0/andrew/f1adpx3_1to90.spotod /bin/rm /scr0/andrew/f1adpx3_1to90.coords /bin/rm f1adpx3_1to90.gen
Possible additional keywords:
PROFILE TOLERANCE 0.02 0.03 PROFILE XLINES 0 75 150 225 300 YLINES 0 75 150 225 300 SEPARATION 0.75 0.75 CLOSE AUTOINDEX CELL KEEP 283.09 107.60 139.65 90.000 90.000 90.000 REJECTION PKRATIO 4.0 RESOLUTION EXCLUDE 3.66 3.72 RESOLUTION ANISOTROPIC 3.5 2.4 2.3 TWOTHETA 15 BEAM SWUNG_OUT 99.96 124.5 LIMITS RSCAN 147.0
These are described below.
1) Optimising the Standard Profiles
Depending on the strength of the images, the degree of diffuse scatter, the spot separation on the images, the crystal mosaicity etc, it may be necessary to adjust the PROFILE TOLERANCE parameters to get well defined standard profiles. The appearance of the standard profiles should always be checked in the logfile, to ensure that adjacent spots are not included in the "peak" region, that long diffuse tails are not being included in the peak, and that not too many profiles are being averaged (see below).
eg PROFILE TOLERANCE 0.02 0.03
The first value is used for profiles near the centre of the image, the second value for profiles at the outside, and an interpolated value for profiles inbetween. Defaults are 0.01 0.01 for a lab source (wavelength 1.542) and 0.01 0.03 for a synchrotron.
It should not normally be necessary to use values above 0.04.
For weak images, you may find that some profiles are being averaged. This is to be avoided if possible. Consider if you are trying to integrate beyond the true resolution limit of the crystals. If not, try to avoid the averaging by one of the following:
i) If profiles are being averaged because there are very few reflections, but the reflections are reasonably strong so that the profiles look OK, reduce the minimum number of reflections required (default 10): eg PROFILE NREF 5
ii) If the profile is being averaged because the rms variation in the background (after scaling the peak to 255) is too large, but in fact this is because there is significant diffuse scatter which should not be included in the Bragg peak, then increase the allowed rms variation (default 10.0): eg PROFILE RMSBG 20.0
iii) Try setting up fewer standard profiles, by defining the regions on the detector where the profiles are to be set up using the XLINES,YLINES keywords:
eg PROFILE XLINES 0 75 150 225 300 YLINES 0 75 150 225 300
will give 16 areas over which a profile will be determined.
2) Specifying the minimum spot separation
The program will automatically determine the minimum allowed spot separation based on the size of spots in the centre of the first image to be processed. Spots closer than this will not be integrated. However, if the spots are very close together, the minimum spot separation determined by the program may be too conservative and result in many spots being rejected. To avoid this, set the minimum spot separation explicitly. Note that in such cases the "CLOSE" option for spot integration should be used (see the Help library under "SEPARATION" for further details of this option). The program also decides if the "CLOSE" option need to be invoked, again based on the very first image to be processed. It is a good idea to ensure that if the CLOSE option is used for one segment of data (eg the 90 images processed in the job above) then it is also used for all other data from this crystal, by specifying its use explicitly.
eg SEPARATION 0.75 0.75 CLOSE
or if just wanting to enfore the use of the CLOSE option:
3) Refining cell parameters during integration
In this case, replace the POSTREF FIX ALL keywords with
POSTREF WIDTH 10
where WIDTH specifies the width (in phi) of data to be used in the refinement. For trigonal or higher symmetry a few degrees of data is usually sufficient, for lower symmetries at least 10 degrees is usually necessary. THIS IS NOT RECOMMENDED: It is usually preferable to determine the cell initially using the POSTREF SEGMENT option.
4) Determining the orientation as part of the job
It is possible to invoke the autoindexing as the first part of a processing job. By default the indexing will be done on the first image to be processed, but the images to be used can be specified explicitly (See section 3.2). In these circumstances the unit cell derived from the autoindexing will be used in the integration, unless the KEEP subkeyword is given with the CELL. Usually an accurate cell (from post-refinement) will be available and should be used in the integration:
AUTOINDEX [ IMAGE 1 2 3 ] CELL KEEP 283.09 107.60 139.65 90.000 90.000 90.000
5) Specifying the size of the integration box
The overall dimensions of the integration or measurement box are determined automatically based on strong spots from the first image to be processed. If you want to make the box smaller or larger than this, specify its size explicitly and tell the program not to change it:
RASTER 25 25 17 3 3 PROFILE FIXBOX
The corner and rim parameters (17 3 3 in above case) will still be optimised, but the overall dimensions will not (use PROFILE NOOPTIMISE (ATALL) to suppress optimisation).
6) Excessive numbers of "Bad spots"
Excessive numbers of "Bad spots" is usually a sign that the processing is not as good as it should be and there are errors in the cell parameters, crystal orientation, mosaic spread or in the detector itself. However, if the cause of the bad spots cannot be corrected, it may be preferable to change the rejection parameters to avoid too many reflections being rejected. This is particularly true if a large number of strong reflections are being rejected because of a poor profile fit, because this could have a significant effect on Patterson based methods used in Molecular Replacement, definition of solvent masks etc.
eg REJECTION PKRATIO 5.0
This should ONLY be done as a last resort, it is much better to find the cause of the rejections. See REJECTION keyword in Help library for more details.
7) Ice rings
If there is an ice ring or spots on the image, all spots within a specified resolution limit can be rejected.
eg RESOLUTION EXCLUDE 3.66 3.72
8) Anisotropic diffraction
If the crystal diffraction is very anisotropic, an anisotropic resolution limit can be applied.
eg RESOLUTION ANISOTROPIC 3.5 2.4 2.3
9) Inclusion of partially recorded reflections in refinement and profiles
The program will decide automatically if partials should be included in the refinement of the detector parameters and formation of the standard profiles. If however you want to explicitly force the program to do so use the following keywords: REFINEMENT INCLUDE PARTIALS for detector refinement PROFILE PARTIALS for profile formation. To explicitly EXCLUDE partials from profile formation use: PROFILE FULLS
10) Processing data from an offset detector (in two-theta)
To process data collected from an offset detector, the swing angle needs to be specified, and the direct beam coordinates should be those corresponding to a two-theta value of zero, unless the SWUNG_OUT subkeywords are given. The areas for the standard profiles MUST be specified explicitly using the PROFILE keyword.
TWOTHETA 15 BEAM SWUNG_OUT 99.96 124.5 ! Direct beam position on swung out ! detector PROFILE XLINES 0 50 100 150 200 YLINES 0 50 100 150 200
11) Excluding a "shadow" around the rim of the imageThe LIMIT RSCAN keywords can be used to limit the "active" area of a circular detector, or XSCAN and YSCAN for an rectangular detecor. All these limits are measured from the physical centre of the detector.
eg. LIMITS RSCAN 146.5
12) Excluding more general "shadows"The NULLPIX keyword can be used effectively to deal with more general shadows, for example if a solid backstop support is used. All pixels with a value less than or equal to that specified by the NULLPIX keyword will be treated as lying outside the active area of the detector, and any spots containing these pixels will be rejected.
In addition, rectangular areas of the detector can be excluded from spot finding and integration by use of the LIMIT EXCLUDE keywords. See the helpfile for details.
13) Resetting the saturation point of the detector
If there is evidence that the detector is saturating before the default cutoff value, it can be reset with the OVERLOAD CUTOFF keywords:
eg OVERLOAD CUTOFF 75000
14) Limiting the resolution
Normally the resolution limit is set by the physical dimensions on the detector. This can be overridden by the RESOLUTION keyword:
eg RESOLUTION 3.5
Both inner and outer resolution limits can be set:
eg RESOLUTION 20.0 3.5
The resolution can also be determined by the quality of the data, so that the resolution limit is determined by the mean value of I/sig(I) within a resolution shell.
eg RESOLUTION CUTOFF 5.0 |
Back to Contents Page
Appendix I - Changes in MOSFLMSummary of major changes from version 5.30 Not yet summarised; see MAJOR CHANGES in Chapter 0.
Back to Contents Page
Appendix II Setting the measurement box parameters manually
Back to Contents Page
Appendix III Overview of MOSFLM
1) IntroductionThe MOSFLM suite of programs is designed to facilitate processing of rotation data collected on either image plate or film. The suite originates from the MOSCO system developed in Cambridge by Nyborg and Wonacott for use on a PDP 11/10 (Nyborg & Wonacott, 1977) but it has been extensively developed since that early version, primarily at Imperial College by A.J. Wonacott, P. Brick and A.G.W. Leslie, and more recently at LMB. In particular the much greater memory and cpu resources available in current machines have been exploited (the first version ran on a machine with 28 Kbytes of memory, the current version uses 5 Mbytes of memory just to store digitised images). The basic procedure for data processing is independent of the type of detector (film or image plate) although there are a number of useful features which are only available for image plate data (particularly automatic updating of cell parameters and crystal orientation).
The MOSFLM program
a) Overview.MOSFLM performs the actual integration of the reflection intensities. It generates the reflection list, reads the digitised image, integrates the spots and writes the intensities and standard deviations into the generate file and mtz file. The image plate version has the additional capability of refining the crystal orientation and cell parameters during data processing using the intensities of partially recorded reflections in the same manner as the POSTCHK program. The program can be run interactively making use of the graphical output options (X-windows of Tektronix emulation), which is most useful when first characterising a new crystal or when dealing with pathological cases. Routine processing is generally done as a background job. The normal operation of the program can be broken down into several steps as outlined below. A summarised flow diagram is given in Figure 2. ii) Generation of a reflection list for this image using the latest refined values for crystal orientation, cell parameters and beam parameters. Crystal orientation can be refined using a pattern matching procedure.) iii) Location of diffraction spots in the central region of the image and refinement of the detector parameters using the observed positions of these spots. Determination of an average spot profile optimisation of measurement box parameters. iv) Location of diffraction spots in the outer regions of the detector and further refinement of detector parameters. v) The pixel values corresponding to the measurement boxes for all reflections are extracted from the digitised image and written to a scratch file. If addition of partially recorded reflections is being done (and this is the default) then only partials at the end of the oscillation range are chosen, and the pixel values for the other "half" of the partial on the NEXT image are added to those of the current image before writing the pixel values to the scratch file. Thus the partial addition is done within MOSFLM, rather than at the SCALA stage. This is only valid if the effective exposure time of both images is the same (eg the data is collected in the "dose" mode rather than simply by time), and the origin (ie direct beam position) and orientation of every image is identical. vi)If post-refinement of the crystal orientation, cell parameters or beam parameters is to be carried out, then the intensities of partially recorded reflections occuring at the end of the oscillation range of the current image and the start of the next image are evaluated as the measurement boxes (for the current image only) are written to the scratch file in step (v) (these intensities are evaluated by summation integration rather than profile fitting). Providing that data over the required angular range is available, post-refinement of the crystal parameters is then carried out. vii) Steps (i) to (vi) are repeated for all the images to be used in forming a set of standard profiles for evaluation of the reflection intensities. Thus the scratch file will finally contain the measurement boxes of a number of different images. viii) The standard profiles are evaluated for several different regions of the detector using the reflection data accumulated in the scratch file. These profiles are then used to evaluate the reflection intensities for each image, and the profile fitted and summation integration intensities and standard deviations are written back to the generate file. ix) Steps (i) to (viii) are repeated until all images have been processed. A more detailed description of each of these steps follows.
---------------------------------| | Read in first two images | (the first image is the 'current image') | ------------------------------|-------------------------------------------| | | Generate reflection list for current image | | | using the latest parameters (orientation cell, etc) | | | | | | | Refine detector parameters, initially using reflections from | | | the central region, then over the entire detector. | | | Optimise the measurement box parameters for the average | | | spot profile of centre of image. This is done for the first | | | image of every new BLOCK of data. | | | | | | | | | | | Simultaneously integrate the two halves of partially recorded | | | reflections for use in post-refinement | | | | | | | Refine crystal orientation etc. using post-refinement | | | | | | | Are shifts acceptably small ? | | | | | | | |----------YES--------------- | | | | | | | | NO | | | | | | | | | Is post-refinement in single image mode ? | | | | | | | | |------------- YES -----------| | | | NO | | | | | | | Is this the first post-refinement run ? | | | | | | |--------------------YES---------| | | NO | | | | | Print warning message | | |---------------------------- | Is refinement residual acceptably small ? | | | STOP------------NO-------| | YES | | | Have sufficient images been accumulated to form standard profiles ? | | | |-------------- NO --- Read next image ----- YES | Rewind scratch file. Form standard profiles. Optimise measurement box parameters for each profile. Reject all background pixels overlapped by neighbouring spots. Integrate all images in this block Write intensities back to generate file. Apply Lp corrections, reduce indices to asymmetric unit write to MTZ file. Calculate R-factor for symmetry related reflections. Write summary file information. | Process next block of images (if any)Figure 2. A Flow diagram of the operation of MOSFLM when using the post- refinement option.
c) Generation of the reflection list.
Generation of the reflection list is performed using the Reeke algorithm.
d) Initial refinement of detector parameters.
The first step in the refinement of the detector parameters is the location of up to 60 suitable reflections. Generally, only fully recorded reflections are selected, as the position of the centroid of a partially recorded reflection will depend on its degree of partiality. For crystals with a high mosaic spread, there may be too few fully recorded reflections to allow a satisfactory refinement, so partially recorded reflections may have to be used. Similarly, overloaded reflections will have a poorly determined centre of gravity, although for very intense images it may be necessary to include some overloaded reflections.The refined parameters are: i) The crystal to detector distance (XTOFD). ii) The position of the centre of the diffraction pattern (XCEN,YCEN). iii) A relative scale factor applied to the Y coordinates (YSCALE). iv) Small rotations of the detector about a horizontal axis (TILT) and a vertical axis (TWIST) v) Rotation of the detector about the X-ray beam direction (OMEGA) vi) Radial (ROFF) and tangential offsets (TOFF) (Mar scanners only, see below) vii) ONLY if explicitly requested (REFINEMENT FREE keywords), the amplidue of the radially dependent radial and tangential offsets RDROFF, RDTOFF in mm (Mar scanners only). Further details of the refinement procedure are given in Appendix IV. Refinement is carried out for a fixed number of cycles, and is followed by a display of the average spot profile of the reflections used in refinement (but not partials) if requested. If the program is being run interactively and automatic measurement box optimisation is NOT being performed, the user has the option to update the parameters defining the measurement box at this stage. If insufficient reflections are found for refinement (ie less than 20), then the program will automatically attempt to find additional reflections in a number of different ways. If the majority of reflections are too weak, then the threshold will be reduced (but only dwon to one sigma). If the majority of reflections are overloaded, it will allow the use of overloaded reflections. If there are fewer than 20 non-overloaded reflections in the central region of the detector, then the size of this region will be enlarged by 10mm (in X and Y). If the final residual is greater than a preset limit, processing will be abandoned.
e) Location of reflections in outer region of the detector and further refinement.Following successful refinement using reflections from the inner region of the detector, a list of all fully recorded reflections ouside this central region is prepared (partials will be included if requested). After sorting this list on the detector X coordinate, it is divided into 8 bins with an equal number of reflections in each bin. Within each bin, reflections with an I/sigma(I) value greater than a preset limit are chosen until a maximum of 5 reflections have been found. If less than 30 reflections are found in total, the I/sigma(I) cutoff is automatically reduced and the search repeated (to a minimum I/sigma(I) cutoff value of 2). These reflections are combined with 20 reflections selected from the central region for final refinement of the detector parameters. The final rms positional residual (given in mm) will depend on the spot size, the strength of the image and the accuracy of the cell parameters, but typical values are 0.02-0.03mm for a reasonably strong image and up to 0.07-0.08mm for relatively weak images. Larger values suggest an error in cell parameters, which can usually be corrected using the post-refinement option. If partial reflections are included in the refinement the positional residual will be significantly larger (eg 0.06-0.07mm for a strong image, 0.10-0.15mm for a weak image).
g) Extracting the measurement boxes from the digitised image.
A final list of all reflections to be integrated is prepared and sorted on the detector X coordinate. Using a circular buffer and working through the digitised image stripe by stripe, the pixel values corresponding to the measurement boxes of these reflections are accumulated and written to a scratch file. The size of the peak area of the measurement box is expanded automatically (by 2 pixels at a time to maintain an odd number of pixels) in order to allow for the increase in spot size due to obliquity of incidence of the diffracted beam on the detector. This is a function of the spot size (determined by collimation and mosaic spread of the crystal), the effective detector thickness and the Bragg angle. If post-refinement is to be carried out (image plate data only), then for each reflection that is partially recorded at the end of the oscillation range of the current image, the identical pixels on the next image in the series are also accumulated. This requires both images to be stored in memory. This is only practical if the detector has a fixed origin and orientation (eg the Mar Research IP scanner) so that the predicted position of the partially recorded reflection is identical in the digitised image on both images. It is unclear at present whether images scanned using an off-line image plate scanner will give sufficiently reproducible results for the method to be applicable. The measurement boxes for the two halves of the partial are then integrated (using summation integration) to give the intensity of the two components, which in turn gives an observed degree of partiality:P(obs) = (Icurr/(Icurr+Inext)) where Icurr is the intensity on the current image and Inext is the intensity on the next image. In order to minimise the errors due to the finite pixel size, the peak area of each measurement box is interpolated onto a grid centred on the calculated position of the reflection, using linear interpolation. If this is not done then the standard profiles, which are formed by averaging all fully recorded reflections within a limited area of the detector, will be artificially broadened because the true reflection position can be up to half a pixel away from the centre of the measurement box (in any direction). The interpolation procedure significantly improves the fit of the profiles, particularly for image plate data, although in this case the linear interpolation procedure is not ideal in view of the very large dynamic range, which can lead to local gradients of 20,000 counts per pixel for strong reflections. The summation integration intensity is unaffected by the interpolation.
h) Post-refinement of crystal orientation, cell parameters and beam parameters.
The degree of partiality of a partially recorded reflection is a function of the crystal orientation, cell parameters and beam parameters (mosaic spread and horizontal and vertical divergence of the X-ray beam). These parameters can therefore be refined using the observations P(obs) described in section (g) if there is a model for the rocking curve, that is, the relationship between the distance of a reciprocal lattice point from the Ewald sphere at the end of the rotation and the resulting intensity of the reflection on that image expressed as a fraction of the total intensity. This rocking curve is therefore used to convert the observed partiality P(obs) to the position of the reciprocal lattice point at the end point of the rotation. It is this conversion which is a function of the mosaic spread and beam divergences. The position of the reciprocal lattice point is then a function of the crystal orientation and cell parameters. It should be noted that this is independent of the reflection coordinates on the detector or the crystal to detector distance.When data from a single pair of images is used to refine crystal orientation, there is essentially no information on the orientation of the crystal around the X-ray beam, and only the missetting angles around the rotation axis (PSIZ) and the direction normal to the rotation axis and X-ray beam (PSIY) are refined. Following refinement these missetting angles are converted back to the standard missetting angles PHIX,PHIY,PHIZ which describe the crystal orientation at phi=0. In general, if the crystal symmetry is lower than trigonal, not all the cell parameters will be well defined using data from one pair of images (the spacing along the X-ray beam direction is poorly defined) and in such cases it is advisable to use an angular wedge of data (typically 5-10 degrees in phi) accumulated over a number of successive images. Even then, some cell parameters may not be well defined (large standard deviations and shifts) and in such cases individual cell parameters can be fixed if desired. However it is preferable to use the POSTREF SEGMENT option to get an accuate cell in advance of the processing run in these cases. When an angular wedge of data is to be used, cell parameter refinemnt is delayed until sufficient images have been processed (the crystal orientation is still refined after evry image). After the first refinement, if there are large shifts in any of the refined parameters the processing will be restarted at the first image using the updated parameter values. This can be repeated a number of times, allowing a reasonably large radius of convergence from inaccurate starting parameters. Post-refinement is then carried out after every image, by deleting the data from the image with the smallest phi value and adding in the data from the latest image. When a single pair of images is used for the refinement, then a large shift in missetting angles or cell parameters will result in the reprocessing of that image. The post-refinement procedure is, not suprisingly, most successful with reasonably strong, high resolution, data. For weak data at low resolution, the correlation between different parameters in the refinement can lead to instability which manifests itself as unrealistically large variations in cell parameters and missetting angles. For example, in the case of monoclinic data collected by rotating about the unique axis, there is a strong correlation between the monoclinic beta angle, the missetting angle around the rotation axis, phiz, and the relative values of the a and c cell parameters. In these cases data from a number of "blocks" of images at different phi values should be used to obtain accurate cell parameters prior to processing, and the cell parameters should be kept fixed during the processing (POSTREF SEGMENT option)
i) Formation of the standard profiles.Normally a number of different standard profiles will be determined for different areas on the detector. These areas are by definition rectangular, and are defined by a set of lines parallel to the detector X and Y directions. By default for high resolution data (greater than 2.5A) the program will generate 6 lines in each direction, giving 5*5=25 standard profile areas of which 4 will be outside the circular resolution limit, leaving 21 active profiles. For resolutions below 2.5A it will generate 4 lines giving 3*3=9 standard profiles.However the user may define his own areas on the detector by supplying the coordinates (in mm) of the defining lines (XLINES,YLINES). The overall measurement box size for each of the standard profiles will be determined by expanding the peak region of the measurement box determined for the central region of the detector to allow for the increase in spot size due to obliquity (this depends on the Bragg angle and the nominal detector thickness). However the optimal background parameters (NRX,NRY,NC) will be determined separately for each of the standard profiles. The standard profiles themselves are determined by summing all fully recorded reflections above a certain threshold intensity. When measuring data from crystals with a very large mosaic spread, there may be very few fully recorded reflections on each image. In these circumstances there is the option to add together the two components of a partial at the stage when the measurement boxes are written to the scratch file (see Fig. 2). In this way reflections which are actually partially recorded at the end of the rotation range of the current image will be treated as if they were fully recorded on the current image, and in particular these reflections are used in forming the standard profiles. This procedure depends on successive images having the same exposure time and incident flux. This threshold is defined in terms of the average, background subtracted, peak pixel value (over 9 central pixels) exceeding the rms variation in background by a specified factor, usually 2. A best least-squares background plane is fitted to the summed reflections (see below for details of background outlier rejection). The resulting pixel values, after scaling the central pixel value to 10,000, is taken as the standard profile. Two criteria are applied to determine whether the resulting profile is satisfactory. First, there is a minimum acceptable number of reflections that contribute to the profile (10) and secondly the rms variation in the background plane (after scaling) must not exceed a specified limit. If a particular profile fails either test, then it is improved by adding in the summed reflections from adjacent regions on the detector. This will normally produce an acceptable profile, but if it does not then no profile fitting will be attempted for that region of the detector. Clearly the accuracy of a given profile will depend on the number (and intensity) of the reflections contributing to that profile. The program therefore allows the standard profiles to be accumulated over a number of successive images, rather than forming them on an image by image basis. Typically, the profiles will be accumulated over between 5 and 10 images. This significantly improves the signal to noise in the profiles, but it would be unwise to average over too many images as the profiles themselves may vary slightly with rotation angle as a result of changes in the diffracting volume of the crystal or radiation damage, which can lead to an increase in mosaic spread an hence spot size.
j) Reflection integration.
Following formation of the standard profiles, the reflections on all images contributing to the profiles are integrated. The first step in this procedure is fitting the best background plane to the background pixels in the measurement mask. In order to deal with outliers (due to cosmic rays, spots from a satellite crystal etc) in the background region of the reflection, the initial background plane is determined using a fraction (between 0.5 and 1.0) of the total number of background points, selecting those pixels with the lowest values. The constant component of the background plane is then adjusted to correct for the systematic bias introduced by selecting the lowest pixel values (assuming a Gaussian distribution). This plane is then used to reject outliers, which are defined as pixels with values which deviate from the plane by more than a fixed number (usually 3) standard deviations, where the standard deviation is based on Poissonian counting statistics. The same procedure is applied to determining the centre of gravity of spots used in positional refinement (sections d and e). The profile fitted intensities and standard deviations are evaluated using weighted profile fitting and methods based on those originally described by Rossmann (1978). For every reflection, a new profile is evaluated by linear interpolation of the standard profiles of the regions surrounding that reflection. The interpolation is based on the distance of the reflection from each standard profile, where the coordinates of the profiles are calculated as the intensity weighted mean of all the reflections contributing to that profile. For most reflections, four different profiles will contribute to the variable profile, but for reflections near the periphery of the detector there may be only three or two contributing profiles, while no sensible interpolation can be done for the outermost reflections. This procedure provides a more accurate modelling of the way in which the profile varies across the face of the detector.The summation integration intensity and standard deviation is also evaluated for every reflection, and both profile fitted and summation integration intensities and standard deviations are written back to the generate and mtz files. Individual reflections are flagged as 'badspots' (which are rejected by MOSFLM) if they fail any of the following tests: 1) The rms fit of the background plane must not exceed a factor (3) times the variation expected on the basis of counting statistics. 2) The intensity should not be negative with an absolute value greater than 5 standard deviations. 3) The fit of the profile should not be worse than a factor (3) times the expected fit based on counting statistics. If a reflection fails this test, only the profile fitted intensity (not the summation integration intensity) will be rejected. 4) The background plane gradient must not exceed a preset value (by default, spots with a ratio of the either background plane gradient (a or b) to the average background (ie a/c or b/c) greater than 0.03 wil be rejected. 5) The reflection must not contain more than a specified number of saturated pixels (ie be overloaded). The intensities of these reflections can be estimated by profile fitting if requested, using only that part of the peak which is not saturated in fitting the standard profile. Typically only a handfull of reflections (between 0 and 5) will be rejected on any image. Larger numbers are indicative of problems in processing, eg poor profile fit due to inaccurate cell parameters.
ii) Orientation refinement by pattern matching.This option permits the refinement of the crystal orientation by automatically optimising the fit between the predicted and observed patterns, by maximising the predicted intensity (ie finding the orientation for which the sum of the intensities of the predicted reflections is a maximum). The basic algorithm is identical to the 'convolution' procedure described by Rossmann (1978). There are minor differences, the most significant being: a) The total predicted intensity is calculated while stepping the missetting angle (either PSIY or PSIZ) through a fixed number of angular steps (typically 9) centred on the current value of that angle. The best value for that parameter is then chosen as the midpoint of the two steps at which the intensity has dropped by 15 standard deviations from its value at the centre of the range (ie the current value). This is in contrast to Rossmann's procedure which simply chooses the value at which the intensity is at a maximum. This makes the refinement less susceptible to errors introduced by statistical fluctuations in the total summed intensity. The step size is then multiplied by a damping factor (normally 0.25) and the grid search repeated. b) When generating the reflection list for different values of PSIZ (say) with a view to optimising the summed intensity, the beam divergence in the horizontal direction is increased by an amount equal to the largest step applied to PSIZ, so that the search is insensitive to errors in PSIY. Similarly, when PSIY is being refined, the vertical divergence is increased by the same amount. With these modifications, the algorithm will converge from an initial orientation up to 2-3 degrees in all three missetting angles for problems with cell parameters between 50 and 100A. However, the advent of autoindexing algorithms has made this option essentially obsolete.
Back to Contents Page
Appendix IV Coordinate systems used by MOSFLM
a) Detector CoordinatesThe coordinates systems used by MOSFLM are illustrated in Fig. 3. The crystal orientation is defined relative to the camera coordinate frame (X,Y,Z), with X along the X-ray beam (away from the source), Z along the rotation axis, and Y forming a right-handed set. A positive phi rotation is anticlockwise viewed from +Z looking towards the origin. The orientation matrices (A and U) are defined relative to this axial system. Coordinates of reflections are calculated in the detector frame (Xd, Yd), which has its origin at the point of intersection of the direct beam and the detector, with Yd parallel to the camera Z axis and Xd parallel to the camera Y axis. Finally, the pixels of the digitised image have coordinates (Xs, Ys). For image plate data and films which have been scanned on a microdensitometer in the normal orientation (that is, with Xd around the circumference of the scanner drum, Yd along the axis of the drum), the origin of this coordinate frame is the lower left corner of the image viewed from behind the detector looking towards the X-ray source (Fig. 3). Thus the scanner axis Xs is (ideally) antiparallel to the detector axis Yd, while scanner axis Ys is (ideally) parallel to detector axis Xd. For film data, there is the option to scan the film in an orientation corresponding to a 90 degree clockwise rotation from that shown in figure 3, in which case Xs is (ideally) parallel to Xd and Ys is (ideally) parallel to Yd. The coordinates of the direct beam position in the scanner coordinate frame (Xs, Ys) are denoted XCEN, YCEN. If the angle between Xd and Xs is denoted by OMEGA, then for image plate data the ideal value of OMEGA is 90 degrees. For film data scanned in the normal orientation (as in Fig. 3), OMEGA may deviate slightly from 90 degrees as its precise value will depend on how the film is placed on the scanner. For film scanned in the alternative orientation, OMEGA will be close to zero.
/! Y-axis / ! ^ / ! ! / ! ! / ! ! / / Xd ! ! / / * ^ ! ! / ! 3 ! ! !/ X-ray beam ! ! ! /-----------------------/--!---->X-axis / ! / *1! <-/- ! / ! / \+ve phi ! Yd / / / ! 2 / / ! * / Z-axis Ys ^ _/ Rotation ! /| Xs axis !/ O Figure. 3The coordinate systems used by MOSFLM. X,Y,Z are an orthogonal frame centred at the point of intersection of the X-ray beam and the rotation axis. Positive phi rotation is anticlockwise as viewed down the Z axis towards the origin (as indicated). The ideal detector coordinate frame (Xd,Yd) has its origin at the point of intersection of the detector plane and the X-ray beam. Yd is parallel to the rotation axis and Xd orthogonal to it. The scanner coordinate frame (Xs,Ys) has its origin at the lower left corner of the image (camera-mans view, ie looking towards the source). If necessary (as it is for images from the Mar scanner) the image will be inverted left to right when read by the program so that internal to MOSFLM the first pixel in the digitised image is in this corner. However this is entirely hidden from the user, and in the display, for example, the first pixel in the image (with pixel coordinates 1,1) will be in the lower right corner of the displayed image. Ys is then the most rapidly changing direction in the digitised image, Xs the more slowly changing direction.
b) Camera Constantsi) Image plate data
The coordinates of the direct beam position XCEN, YCEN in the scanner coordinate frame must be supplied by the user. Any deviation in the refined position of the centre of the diffraction pattern from these coordinates are denoted by the camera constants CCX, CCY. It should be noted that CCX, CCY are defined in the detector frame (Xd, Yd), NOT in the scanner coordinate frame. This a positive CCX represents a displacement along +Ys, while a positive CCY is a displacement along -Xs. Any deviation of the angle OMEGA from its expected value of 90 degrees is referred to by the camera constant CCOMEGA. The camera constants allow for errors in the user defined position of the direct beam (CCX and CCY) and in the alignment of the scan direction of the image plate relative to the camera (and detector) axes (CCOMEGA).ii) Film data
For film data the camera constants CCX, CCY denote the deviation of the refined position of the centre of the diffraction pattern from the midpoint of fiducial marks 1 and 3 (Fig. 3), as appropriate for an Enraf Nonius oscillation camera. They are expressed in the detector frame (Xd, Yd), so that they are independent of the orientation of the film on the scanner. The line joining fiducial marks 2 and 3 is assumed to be parallel to the detector axis Xd , and any deviation is denoted by the camera constant CCOMEGA. Note that for film data, the value of OMEGA will not necessarily be 90 degrees (normal orientation) or 0 degrees (rotated orientation) because it will depend on exactly how the film is placed on the scanner. The orientation of the film on the scanner does NOT affect the relative orientation of the line joining fiducials 2 and 3 and the detector axis Xd at the time of collecting the data. The camera constants allow for errors in the positioning of the cassette on the carousel and misalignment of the camera itself.
c) Coordinate TransformationsThe basic transformation between the calculated detector coordinates of the reflections (Xd, Yd) and the scanner coordinates in the digitised image (Xs, Ys) is given by: Xs = XCEN + XTOFRA*( Xd Cos(OMEGA) - Yd Sin(OMEGA)) Ys = YCEN + XTOFRA*YSCALE*( Xd Sin(OMEGA) + Yd Cos(OMEGA)) where: XCEN, YCEN are the coordinates of the centre of the diffraction pattern (the direct beam position) in the scanner coordinate frame. XTOFRA is a refined scale factor which accounts for variations in crystal to detector distance. Its nominal value is 1.0, as the actual crystal to detector distance is implicit in the detector coordinates. YSCALE is a further refined scale factor defining the relative scales along the Ys and Xs axes. For image plate data YSCALE should be unity, but for film data the pixel size around the circumference of the drum is increased slightly due to the finite thickness of the X-ray film (by about 0.2%), so YSCALE should have a value close to 0.998. OMEGA is the (refined) angle between Xd and Xs . For image plate data, an additional four parameters have been introduced to allow for errors in the alignment of the camera and distortions introduced by mechanical misalignment of the scanner. TILT and TWIST allow for the detector plane being non-normal to the incident X-ray beam, and correspond to a rotation about an axis parallel to the camera Z axis and camera Y axis respectively (ie horizontal and vertical axes in the conventional arrangement). The effect of these rotations on spot positions can be adequately modelled (for alignment errors of a few degrees or less) by a variation in crystal to detector distance that is dependent on Xd (TILT) or Yd (TWIST). Thus XTOFRA is replaced by: XTOFRA' = XTOFRA + TILT*Xd + TWIST*Yd When expressed in this way, TILT and TWIST when divided by the crystal to detector distance are the actual rotations (in radians). The refined values printed by the program are expressed in hundredths of a degree. For the Mar Research image plate scanner, it is assumed that the first pixel of the spiral scan (at the outer edge of the image plate) is at a known radius from the centre of the image plate. Any error in the presumed radius of this first pixel will result in a (fixed) radial offset in the positions of all reflections. This is modelled by a refineable radial offset (ROFF). A second assumption is that the radial scan is indeed exactly radial, ie would pass through the centre of rotation of the image plate. If this is not the case, to a good approximation it will result in a (fixed) tangential offset in the position of all reflections (TOFF). (Note that this assumption would break down for very small radii, but as the inner radial limit of the scan is 10mm this is not a problem in practice). It has been found that ROFF and TOFF show a radial dependence that is significant in some 30cm Mar scanners. This has been modelled as a sine-wave dependence, giving: ROFFTOT = ROFF + RDROFF*SIN(PI*R/RSCAN) TOFFTOT = TOFF + RDTOFF*SIN(PI*R/RSCAN) Where RSCAN is the scanner radius and R is defined below. Defining: Xm = Xd Cos(OMEGA) - Yd Sin(OMEGA) Ym = Xd Sin(OMEGA) + Yd Cos(OMEGA) PSI = atan (Ym/Xm) then the transformation, including the distortion components, is given by: Xs = XCEN + (XTOFRA + TILT*Xd + TWIST*Yd)*Xm + ROFFTOT*Cos(PSI) - TOFFTOT*Sin(PSI) Ys = YCEN + (XTOFRA + TILT*Xd + TWIST*Yd)*YSCALE*Ym + ROFFTOT*Sin(PSI) + TOFFTOT*Cos(PSI) These equations are used in the least squares refinement of the detector and distortion parameters, using the measured centres of gravity of the selected refinement spots (in the scanner coordinate frame) as the observed positions. For film data, three distortion parameters are refined. The first two, TILT and TWIST are identical to those used for image plates. The third parameter is to allow for bulging of the X-ray film in the cassette. This is modelled as a radially dependant variation in the crystal to detector distance, corresponding to a conical distortion which is radially symmetric. Using Xm and Ym as defined above, and defining in addition: R = SQRT( Xd*Xd + Yd*Yd) the transformation for film data becomes: Xs = XCEN + (XTOFRA + TILT*Xd + TWIST*Yd + BULGE*R)*Xm Ys = YCEN + (XTOFRA + TILT*Xd + TWIST*Yd + BULGE*R)*YSCALE*Ym Refinement procedes in an identical manner to image plate data, with the exception that as the BULGE parameter is poorly defined when using only data from the central area of the image, it is held fixed at its input value during the initial refinement. The refinement of crystal to detector distance (as XTOFRA) and the YSCALE parameter allow for errors in crystal cell parameters to be at least partially compensated when predicting reflection positions. This can be important in cases where no accurate values are initially available, as the post-refinement option for refining cell parameters is of course only available once the images have been measured.
ReferencesA. Jones, K. Bartels & P. Schwager (1977) in 'The Rotation Method in Crystallography', U.W. Arndt & A.J. Wonacott, eds, North Holland Publishing Co. W. Kabsch (1988) J. Appl. Cryst., 21, 67-71. W. Kabsch (1993) J. Appl. Cryst., 26, 795-800. I. Steller, R. Bolotovsky & M.G. Rossmann (1998) J. Appl. Cryst. 30, 1036-1040 A.G.W. Leslie (1990) in 'Crystallographic Computing', Oxford University Press. J. Nyborg & A.J. Wonacott (1977) in 'The Rotation Method in Crystallography', U.W. Arndt & A.J. Wonacott, eds, North Holland Publishing Co. M.G. Rossmann, A.G.W. Leslie, S. Abdel-Meguid & T. Tsukihara (1979), J. Appl. Cryst., 12, 570-581. M.G. Rossmann (1979), J. Appl. Cryst. 12, 225-238. F.K. Winkler, C.E. Schutt & S.C. Harrison (1979), Acta Cryst. A35, 901-911. A.J. Wonacott (1977) in 'The Rotation Method in Crystallography', U.W. Arndt & A.J. Wonacott, eds, North Holland Publishing Co. |
Harry Powell Last modified: Thu Mar 15 16:05:12 GMT 2001